Speech
Show spoken, sung or typed words on screen as they are heard: live captions for a stream, church lyrics in a lower third, karaoke, subtitles, or words spelled in binary.
Speech puts words on screen as they are heard. It listens to your microphone, follows captions or lyrics you paste, or plays text you type. Show a sentence at a time, one word at a time, a paragraph whose new lines push the earlier ones up like live captions, or every word filling the frame. Twenty-seven presets cover live captions, worship lyrics in a lower third, karaoke, subtitles and bold word art, and the music can bend, shake and light the words.
Open Speech
Launch the visualizer with its matching left-nav entry selected.
How do I add live captions to a live stream?
Choose the LIVE CAPTIONS preset, set WORDS → SOURCE to MICROPHONE and turn on LISTEN. Your words appear as you say them in a two-line box in the lower third, and each new line pushes the last one up.
- Open PRESETS and choose LIVE CAPTIONS.
- Under WORDS → SOURCE, choose MICROPHONE, then turn on LISTEN and allow the microphone when the browser asks.
- Set LANGUAGE to the language you speak. BROWSER LANGUAGE listens in your browser's own language.
- Speak. HEARD shows the latest words; CLEAR HEARD starts over.
- When you finish, press SAVE SRT or SAVE WEBVTT for a captions file to load with your recording, or SAVE TEXT for the words alone.
- Under DISPLAY, set LINES for how many lines stay on screen and HOLD for how long the captions stay after you stop talking.
- Choose PANEL → BOX or BAR and set PANEL OPACITY so the captions read over your picture.
- Capture the BeamTracer window in your streaming software to send the captions out with your stream, or send them to OBS on a clear background with Output stage → Send to OBS → Send live words (live captions in OBS).
Your browser does the speech recognition and may send the audio to its speech service. Use Chrome, Edge or Safari. Accuracy depends on your browser, your microphone and the room, so these captions are a visual aid, not a certified captioning service. Listening is never saved with a preset. LANGUAGE is remembered by this browser, and SPEECH TO BINARY in the ASCII effect listens in the same language. The saved captions count from the first word heard and keep the pauses between phrases, so they line up with a recording you started when the speaking began; the file is made on your computer and is not uploaded.
The live captions tutorial walks through this setup with a clip of the captions rolling.
How do I show church lyrics in a lower third?
Choose WORSHIP LYRICS or LOWER THIRD, then paste the song under WORDS → SOURCE → CAPTIONS. Each line shows in the lower third of the frame, over your camera or a still picture.
- Open PRESETS and choose WORSHIP LYRICS for words over a picture, or LOWER THIRD for words on a bar.
- Under WORDS → SOURCE, choose CAPTIONS and paste the lyrics into CAPTIONS OR LYRICS.
- Paste an LRC, SRT or WebVTT file to follow the track, or plain lines to pace them with SPEAKING PACE.
- Open PICTURE and choose CAMERA or VIDEO · IMAGE to put your stage or a background behind the words.
- Adjust TYPE → LARGEST SIZE and DISPLAY → HOLD, then play the track.
Timed lyrics follow the position of the playing track, including when you seek. When the band plays live, set ADVANCE to MANUAL and move through the song one line at a time (below). To follow a live singer by ear instead, choose MICROPHONE and LISTEN; spoken words are recognized more reliably than sung ones.
The church lyrics tutorial shows this look over a picture, step by step.
How do I show lyrics one line at a time while the band plays?
Set WORDS → ADVANCE to MANUAL. Speech then shows one line of your lyrics and keeps it on screen until you move to another, so whoever runs the screen follows the singers instead of a timer.
- Under WORDS → SOURCE, choose CAPTIONS and paste the song, one line of lyrics on each line. TYPED TEXT works the same way.
- Set ADVANCE to MANUAL. The screen starts empty, before the first line.
- Press NEXT LINE to show each line as it is sung, and PREVIOUS LINE to go back. The button reads the line you are on, such as LINE 3 OF 12.
- Turn on BLANK to clear the screen between verses or songs without losing your place. NEXT LINE or PREVIOUS LINE brings the words back.
- Press BACK TO THE START before the next song.
You do not need the panel open during the song. Page Down and Page Up move to the next and previous line, and most presentation clickers send these keys from their forward and back buttons. (The arrow keys keep seeking the track.) In Performer, NEXT LINE, PREVIOUS LINE and BLANK can also be learned as a MIDI note, a key or an OSC message, so a foot pedal or a pad on a controller can run the song.
Each line arrives with the look you chose: word by word at SPEAKING PACE, or all at once with DISPLAY → REVEAL → ALL AT ONCE. MANUAL applies on this page; a video from RENDER plays the lines at SPEAKING PACE, and a link sent to OBS shows the line that was on screen when you copied it.
For a walkthrough with a presentation clicker and a stage monitor, see How do I show church lyrics one line at a time?.
How do I mark verses, choruses and repeats in my lyrics?
Put each section's name in square brackets on its own line, the way lyric sheets write them. Speech plays the song in that order and never shows the headers.
[Verse 1]
Amazing grace how sweet the sound
That saved a wretch like me
[Chorus]
My chains are gone
[Verse 2]
Twas grace that taught my heart to fear
[Chorus]
[Bridge x2]
The earth shall soon dissolve like snow- A header with no lines under it repeats the section of that name, so a chorus is typed once.
x2(or×2) after a name plays that section twice, up to eight times.- UP NEXT names a section as it comes up, for example Chorus · My chains are gone, and NEXT LINE steps through the whole arrangement.
Sections work in typed text and in plain lines pasted under CAPTIONS. LRC, SRT and WebVTT files already carry their own times, so they play as written.
The line-by-line tutorial runs a song with sections by hand.
How do I show lyrics in two languages?
Turn on WORDS → TRANSLATION LINES and paste each line followed by its translation. Speech shows the first line of each pair as the lyric and the second under it, smaller and softer, for a bilingual service or karaoke night.
Amazing grace how sweet the sound
Sublime gracia del Señor
That saved a wretch like me
Que a mí, pecador, salvó- Under WORDS → SOURCE, choose CAPTIONS or TYPED TEXT and enter the lyrics in pairs: the line, then its translation.
- Turn on TRANSLATION LINES.
- Choose a look such as LOWER THIRD or WORSHIP LYRICS; the translation follows its font and color.
Song sections still work: put a [Chorus] header above the pairs. NEXT LINE steps a pair at a time, and UP NEXT shows the next line in the first language, under the translation. Translation lines are for lyrics with no times; LRC, SRT and WebVTT files play as written.
How do I show lyrics or live captions in two languages? walks through a worship song in English and Spanish, and live captions in another language.
How do I translate live captions as I speak?
Set WORDS → SOURCE to MICROPHONE, turn on LISTEN, and choose a language under TRANSLATE TO. Each phrase you finish appears in that language under your words, smaller and softer, in the font and color of the look. Words already on screen stay as they were; translation starts with the next phrase.
- Choose a look such as LOWER THIRD or LIVE CAPTIONS.
- Under WORDS → SOURCE, choose MICROPHONE, turn on LISTEN and allow the microphone.
- Under TRANSLATE TO, choose the language for the second line. The line under it says how the translation is done.
Chrome and Edge on a computer translate on your computer, free, for about 40 languages. The first time you choose a language, they may download it; if DOWNLOAD TRANSLATION appears, click it once. BeamTracer translates Filipino (Tagalog) on paid plans, along with languages that your browser cannot translate on your computer. A finished phrase can stay visible a little longer while its translation is on the way. Both lines stay up for HOLD after the translation appears or until the next phrase begins. Choose OFF to stop. With Send live words on in Output stage → Send to OBS, the translations go to OBS with your words, so the second line shows in the stream too (live captions in OBS).
Translations are made by a machine and can be wrong, so treat them as a visual aid for the room, not a certified translation.
How do I show the next line to the singers?
Turn on DISPLAY → UP NEXT. The line that comes next appears under the words, smaller and dimmed, so the singers and the room see what is coming. For a confidence monitor on the stage floor, choose the STAGE MONITOR preset: the line now in large type, the next line under it and the time of day in the corner.
- Paste the song under WORDS → SOURCE → CAPTIONS, or type it under TYPED TEXT.
- Open PRESETS and choose STAGE MONITOR for the stage, SCROLLING LYRICS for the last lines sung with the next one waiting, or LOWER THIRD + NEXT for a stream.
- To add the preview to another look, turn on DISPLAY → UP NEXT. CLOCK shows the time in a top corner.
- Set WORDS → ADVANCE to MANUAL to move through the song by hand; UP NEXT then shows the line NEXT LINE will bring up, even while the screen is BLANK.
UP NEXT follows timed lyrics by their own times and wraps to the first line when typed words repeat. It works with SENTENCE, WORD and PARAGRAPH, and not with the microphone, which cannot know what comes next. A video from RENDER leaves the clock out.
The line-by-line tutorial shows STAGE MONITOR stepped by hand.
How do I make karaoke lyrics or subtitles?
Choose KARAOKE to light each word as it is sung, or SUBTITLES for outlined lines at the bottom of the frame. Both read the lyrics you paste under CAPTIONS.
A WebVTT file with a time on each word lights the words at those times. LRC, SRT and plain WebVTT cues spread each line's words across the line. In Studio, lyrics found by AUTO DETECT usually carry each word's time too, and reach Speech through STUDIO LYRICS. DISPLAY → REVEAL chooses ALL AT ONCE, WORD BY WORD or LETTER BY LETTER.
The karaoke and subtitles tutorial covers the steps and how to save the video.
How do I show Studio lyrics with Speech?
In Studio, choose SPEECH for the visualizer layer and set WORDS → SOURCE to STUDIO LYRICS. Speech then draws the project's timed lyrics in the preview and the export, and you can hide the LYRICS layer so the words are drawn once.
How do I spell words in binary or hex?
Open BINARY and choose where the digits go: IN LETTERS cuts the words into digits, BEHIND fills the frame with digits behind them, CUTOUT cuts the letters out of that field, and ABOVE WORDS prints the digits above each word. DIGITS chooses BINARY, eight zeros and ones for each character, or HEX, two hexadecimal digits for each character. Either way the digits spell the words on screen, left to right and top to bottom.
Try BINARY VOICE, HEX VOICE, CODE CAPTIONS, MATRIX FIELD or CUTOUT. MATRIX WORDS, MATRIX PICTURE and BLOCK TEXT also load the shared Effects panel to redraw the words as falling code or shaded blocks; choose another preset to clear those effects.
How do I key captions over my camera in streaming software?
Choose GREEN SCREEN. Your captions roll in a solid box on a flat green frame, so a chroma key filter in your streaming software removes the green and leaves the captions over your camera.
- Open PRESETS and choose GREEN SCREEN, or BLUE SCREEN if something green is in your shot.
- Under WORDS → SOURCE, choose MICROPHONE and turn on LISTEN, or choose CAPTIONS and paste your lyrics.
- Capture the BeamTracer window in your streaming software and place it above your camera.
- Add a chroma key filter to that capture and set it to green, or to blue for BLUE SCREEN.
- Leave BACKGROUND OPACITY at 1.00 so the frame stays one flat color.
Both presets keep glow and shadow off and the box solid, because soft edges pick up the key color. Change COLOR → BACKGROUND if your software keys another color.
For words you typed or pasted, you can skip the key. In Output stage → Send to OBS, turn on Transparent and copy the link: it carries your Speech look and draws it on a clear background, so OBS shows the words over your camera with their glow and soft edges intact. The link shows TYPED TEXT and pasted lines at SPEAKING PACE. For words from your microphone, also press Send live words under Live words before you copy the link: the words you speak appear in OBS on the same clear background (live captions in OBS). For lyrics timed to the track you are playing, send this window with a key color as above. See Streaming with OBS.
How do I put a camera, a video or an image with the words?
Open PICTURE. BEHIND WORDS fills the frame behind the words, IN THE LETTERS shows the picture through the letters, and LETTERS CUT OUT cuts the letters out of the picture. Choose CAMERA, SCREEN or VIDEO · IMAGE below; a photograph shows until you pick one. DIM PICTURE darkens it so the words stand out.
Quick start
- Start the demo track, choose a local audio file, or enable a live input.
- Try a preset or style first, then open the section for the part of the image you want to change.
- On a control with Assign modulation, open the source picker, choose a signal, and watch the slider's live fill.
- Use Reset to Defaults whenever you want to return to the original look.
To save a video, choose RENDER, select MP4 · H.264 or WEBM · VP9, then choose RENDER VIDEO. A render uses TYPED TEXT or CAPTIONS; it cannot listen to the microphone, and it draws the words without a PICTURE. Video export settings.
Presets and styles
Headline · Binary Voice · Hex Voice · Code Captions · Word Wall · One Word · Typewriter · Neon Sign · Matrix Field · Cutout · Picture Behind · Picture Words · Picture Cutout · Matrix Words · Matrix Picture · Block Text · Comic · Hollow · Scramble · Lower Third · Live Captions · Green Screen · Blue Screen · Worship Lyrics · Stage Monitor · Scrolling Lyrics · Lower Third + Next · Subtitles · Karaoke · Transcript
Audio modulation
On a control with Assign modulation, select the activity icon to open Modulate with. Choose a named source, or choose — None to leave the control unmodulated. After you assign one, its name appears below the slider; select that name to edit the route, or use Clear modulation to remove it. The slider track shows the live signal reaching the control.
| Modulated control | Section | What the route changes |
|---|---|---|
| Glow | Color | How strong the soft light around the letters is. |
| Wave | Motion | How far the music bends the lines of text. |
| Jitter | Motion | How far each word wanders and tilts on its own with the music; zero keeps the words in line. |
| Beat Pulse | Motion | How much each beat lights the words. |
Settings reference
Words
| Setting | Available values | What it changes |
|---|---|---|
| Source | TYPED TEXT, CAPTIONS, MICROPHONE | Where the words come from: text you type, captions or lyrics you paste, or your microphone. With MICROPHONE, LISTEN shows what it hears as you say it, CLEAR HEARD starts over and TRANSLATE TO adds each phrase in a second language under the words. |
| Your Text | Text, up to 2000 characters | The words to show, one phrase on each line. They repeat at the speaking pace. |
| Captions Or Lyrics | Text, up to 60000 characters | Paste a WebVTT, SRT or LRC file to follow the track’s time, or plain lines to pace them like typed text. |
| Speaking Pace | 40–400 | How fast words without their own times arrive, in words a minute. |
| Translation Lines | On / Off | Lyrics in two languages: each second line is the translation of the line before it and shows under it, smaller. For typed words and lines with no times. |
| Advance | PACE, MANUAL | PACE plays the lines by themselves. MANUAL shows one line until you move on, for a song sung live: press NEXT LINE and PREVIOUS LINE here, with Page Down and Page Up (a presentation clicker sends these), or with a MIDI note, key or OSC message learned in Performer. |
| Next Line | Action | Show the next line. Learnable as a MIDI note, a key or an OSC message in Performer. |
| Previous Line | Action | Show the line before. Learnable as a MIDI note, a key or an OSC message in Performer. |
| Blank | On / Off | Hide the words and keep your place, between verses or songs. NEXT LINE and PREVIOUS LINE show the words again. |
| Back To the Start | Action | Clear the screen and start again before the first line, for a new song. |
Picture
| Setting | Available values | What it changes |
|---|---|---|
| Picture | OFF, BEHIND WORDS, IN THE LETTERS, LETTERS CUT OUT | Show a camera, a video or an image with the words: behind them, through the letters, or with the letters cut out of it. Pick the picture below; a photograph shows until you do. |
| Dim Picture | 0–0.9 | Darken the picture so the words stand out against it. |
Display
| Setting | Available values | What it changes |
|---|---|---|
| Show | SENTENCE, WORD, FILL SCREEN, PARAGRAPH | A sentence at a time, one word at a time, every word filling the frame as it is heard, or a paragraph whose new lines push the earlier ones up like live captions. |
| Lines | 1–12 | The most lines a paragraph shows; a new line pushes the earlier ones up and the oldest leaves. |
| Position | MIDDLE, TOP, BOTTOM, LOWER THIRD | Where the words sit: the middle of the frame, the top, the bottom, or the lower third used for captions and lyrics. |
| Reveal | ALL AT ONCE, WORD BY WORD, LETTER BY LETTER | Show the whole sentence at once, add each word as it is spoken, or type it letter by letter. |
| Hold | 0s–20s | How long a sentence, a word or a paragraph stays after it has been said. A paragraph starts over after a silence this long. |
| Up Next | On / Off | Show the line that comes next under the words, smaller and dimmed, so singers see what is coming. With ADVANCE on MANUAL it is the line NEXT LINE will show. |
| Clock | On / Off | Show the time of day, small, in a top corner, as a stage monitor does. A video from RENDER leaves it out. |
| Words On Screen | 8–200 | The most words kept on screen before the oldest scroll away. |
| Panel | OFF, BAR, BOX | A panel behind the words so they read over any picture: a band across the frame, or a box around the words. |
| Panel Color | Color | The color of the panel behind the words. |
| Panel Opacity | 0–1 | How solid the panel behind the words is. |
| Arrive | CUT, FADE, RISE, POP, DROP, BOUNCE, TRACK IN, SCRAMBLE | How each word comes in: at once, fading, rising into place, popping, dropping in tilted, bouncing past its size, closing up from spread letters, or shuffling through other letters before it settles. |
| Arrive Time | 0.05s–1.5s | How long a word takes to arrive. |
Type
| Setting | Available values | What it changes |
|---|---|---|
| Font | Any font in the font library | The typeface the words are set in. |
| Bold | On / Off | Use the typeface’s bold weight when it has one. |
| All Caps | On / Off | Show every word in capital letters. |
| Largest Size | 0.05–1 | How tall the letters may get; longer text shrinks to fit the frame. |
| Line Spacing | 0.7–2 | Space between lines. |
| Align | LEFT, CENTER, RIGHT, JUSTIFY | Set the lines to the left, the center or the right, or justify them so every full line reaches both edges. |
| Margin | 0–0.3 | Empty space kept around the words. |
Color
| Setting | Available values | What it changes |
|---|---|---|
| Palette | YOUR COLORS, SYNTHWAVE, VAPOR, SUNSET, OCEAN, FOREST, ICE, PLASMA, GAMEBOY, MONO | Use your own colors or one of the shared scene palettes. |
| Text | Color | The color of the words. |
| Gradient End | Color | The color the words run to at the bottom of the frame. |
| Gradient | 0–1 | How much the words blend from the text color at the top to the second color at the bottom. |
| Newest Word | Color | The color the newest word takes before it settles. |
| Newest Word Amount | 0–1 | How strongly the newest word takes its own color. |
| Background | Color | The color behind the words. |
| Glow | 0–2 | How strong the soft light around the letters is. Use Assign modulation to choose a source. |
| Glow Distance | 4px–400px | How far the glow reaches from the letters, like an outer glow’s size. |
| Glow Spread | 0–1 | How much of that distance stays solid before the glow fades, like an outer glow’s spread. |
| Glow Color | WORD COLOR, OWN COLOR | Glow each word in its own color, or give the glow a color of its own. |
| Glow | Color | The glow’s own color. |
| Color Cycle | -1–1 | Turns the text colors through the hues; zero holds them still. |
Style
| Setting | Available values | What it changes |
|---|---|---|
| Outline | 0px–40px | A line around every letter; zero is none. |
| Outline Color | Color | The color of the outline. |
| Letters | SOLID, HOLLOW | Fill the letters, or leave them hollow so only their outline, glow and shadow show. |
| Shadow Distance | 0px–80px | How far a drop shadow falls from the letters; zero is none. |
| Shadow Angle | -180°–180° | Where the light comes from; the shadow falls the opposite way. |
| Shadow Softness | 0px–60px | How soft the shadow’s edge is; zero is a hard copy of the letters. |
| Shadow Color | Color | The color of the shadow. |
Binary
| Setting | Available values | What it changes |
|---|---|---|
| Binary | OFF, IN LETTERS, BEHIND, CUTOUT, ABOVE WORDS | Spell the words on screen in digits: cut into the letters, as a field behind them, as a field with the letters cut out of it so the background shows through, or above each character. |
| Digits | BINARY, HEX | BINARY spells each character as eight zeros and ones. HEX spells it as two hexadecimal digits, 0 to 9 and A to F. |
| Digit Size | 6px–60px | How tall the digits are in the letters and the field. |
| Binary Amount | 0–1 | How much of each letter is cut into digits, or how bright the field of digits is. |
| Digit Font | Any font in the font library | The typeface of the digits. |
| Digit Color | Color | The color of the field behind the words and the digits above them. |
Audio
| Setting | Available values | What it changes |
|---|---|---|
| Audio Gain | 0–4 | How strongly the music drives the wave, the glow and the beat pulse. |
| Smoothing | 0–1 | Higher values make the reaction to the music slower and steadier. |
Motion
| Setting | Available values | What it changes |
|---|---|---|
| Animation | ON, OFF | ON lets the music bend the lines, shake the words and light them. OFF holds the words still, with no wave, jitter, beat pulse or color cycle. |
| Wave | 0–1 | How far the music bends the lines of text. Use Assign modulation to choose a source. |
| Wave Speed | 0–4 | How fast the wave travels along the lines. |
| Jitter | 0–1 | How far each word wanders and tilts on its own with the music; zero keeps the words in line. Use Assign modulation to choose a source. |
| Jitter Speed | 0.5–12 | How many times a second a wandering word changes direction. |
| Jitter Together | 0–1 | Zero lets every word wander its own way; one moves them all together. |
| Beat Pulse | 0–1 | How much each beat lights the words. Use Assign modulation to choose a source. |
| Frame Rate | DISPLAY, 24 FPS, 25 FPS, 30 FPS, 48 FPS, 60 FPS | Hold the live picture to a film or video frame rate. Render Video uses the rate chosen in its own dialog. |
Background
| Setting | Available values | What it changes |
|---|---|---|
| Background Opacity | 0–1 | Fade the background behind the words, down to fully see-through for layering in Studio. |
Some controls appear only after you enable a related mode or style. The settings panel always reflects the options available for the current selection.
Tips for a better audio visualization
- Start with HEADLINE, then try ONE WORD, WORD WALL, NEON SIGN and TYPEWRITER. Presets keep your words, your source and your background opacity.
- DISPLAY → SHOW chooses SENTENCE, WORD, FILL SCREEN or PARAGRAPH. POSITION places the words in the MIDDLE, at the TOP or BOTTOM, or in the LOWER THIRD.
- ARRIVE sets how each word comes in: CUT, FADE, RISE, POP, DROP, BOUNCE, TRACK IN or SCRAMBLE. ARRIVE TIME sets how long it takes.
- Under TYPE, choose a FONT, BOLD, ALL CAPS and ALIGN. JUSTIFY makes every full line reach both edges. LARGEST SIZE is a limit: longer text shrinks to fit.
- Under COLOR, GLOW DISTANCE sets how far the glow reaches and GLOW SPREAD how much of that stays solid. GLOW COLOR glows each word in its own color or in one color you choose.
- STYLE adds an OUTLINE, HOLLOW letters and a drop shadow with SHADOW DISTANCE, SHADOW ANGLE and SHADOW SOFTNESS. COMIC and HOLLOW show them.
- MOTION → ANIMATION → OFF holds the words still for captions. With it ON, WAVE bends the lines with the bass, JITTER lets each word wander on its own, and BEAT PULSE lights the words on each beat. Each accepts Assign modulation.
- FRAME RATE holds the live picture to 24, 25, 30, 48 or 60 frames a second. Render Video uses the rate chosen in its own dialog.
- Set BACKGROUND OPACITY to 0 to layer the words over another source in Studio.