Movies & TV guides

Camera Chart

Make the classic 1956 camera resolution chart in your browser: line wedges, gray scales, gratings and corner circles in a big white circle, with your names in its black bars, live widgets in its circles and parts that move with your music, rendered as a video.

To make the classic camera resolution chart, open Title Cards and choose MODULE → CAMERA CHART. You get the 1956 chart redrawn line for line: a gray field with a big white circle, a square of fine lines with a target in the middle, four line wedges numbered in TV lines, four gray scales, diagonals, gratings, and a circle of wedges in each corner. Your names go in its two black bars. Put live widgets in its circles, set its scales and gratings moving with your music, and render it as a video.

Open Title Cards

Choose CAMERA CHART under MODULE.

How do I make a camera resolution chart with my channel name?

  1. Open Title Cards and choose MODULE → CAMERA CHART.
  2. Under TEXT, type your channel's or show's name in the box under TOP NAME, and a second line under BOTTOM NAME. They stand in the long black bars above and below the square. If you typed a name on another test card first, it is already there: words follow you when you change MODULE from one test card to another.
  3. Under STYLE, set LINE INK, PAPER COLOR and FIELD COLOR for your colors. The gray scales stay in step between the paper and the ink.
  4. Under LAYOUT, keep FILL to spread the chart across a wide video, or pick 4:3 for the chart in its own box.
  5. Choose RENDER, then RENDER VIDEO, and SAVE VIDEO when it reads VIDEO READY.
CAMERA CHART, what the module opens with

Which presets are there?

Each preset is a starting point; every setting can be changed after you choose one.

PresetWhat it is
CAMERA CHARTThe chart as drawn, black on white on its gray field, spread across a wide video. Choosing CAMERA CHART opens it.
LIVE CHARTAn oscilloscope in a circle over the square drawing your music, the gray scales lighting as level meters and the gratings opening as a spectrum.
4:3 CHARTThe chart in its own 4:3 box, as it was printed, with the title's BACKGROUND either side.
LIVE CORNERSA radar, a globe, a phase wheel and a readout ring in the four corner circles, each on a pale tint of its own.
MATRIXLight lines on black, the field and paper turned to falling green characters.
SCOPE GREENPhosphor green on a dark green field, with an oscilloscope in green over the square.
LASER SIMPLECyan lines on black with no paper, scales, gratings or numbers: close to what a laser draws.
BEAT METERSThe chart as drawn, with the scales and gratings moving with the music and the corner wedges turning.
PIRATE BROADCASTA 1990s hacker screen: neon green on deep purple, PIRATE and SIGNAL in 8-bit letters, the Jolly Roger over the square, green ASCII rain behind the chart and the picture tearing on the beat.
4:3 CHART
LIVE CORNERS
LASER SIMPLE

Can I put a live visualizer or widget in the circles?

Yes. Each of the four corner circles is its own: under STYLE, TOP LEFT CIRCLE, TOP RIGHT CIRCLE, BOTTOM LEFT CIRCLE and BOTTOM RIGHT CIRCLE each show the chart's own WEDGES, the JOLLY ROGER, a live clock, visualizer or widget that moves with the music (OSCILLOSCOPE GLOW, SPECTRUM ANALYZER · RADIAL, CLOCK BRAUN, RADAR, GLOBE and more), or NONE. A circle showing a widget or the Jolly Roger has its own BACKGROUND, HUE SHIFT and BRIGHTNESS; use Assign modulation on either to pulse it with the music.

Turn on MIDDLE CIRCLE ON to stand one more circle over the square in the middle, with the same choices. MIDDLE CIRCLE SIZE takes it from a badge over the target to the whole white circle. OSCILLOSCOPE GLOW draws a white trace to match the chart; set the circle's LINE COLOR to GREEN for phosphor green, or to BLUE, PURPLE, ORANGE or CYAN. Under MOTION, CIRCLES IN and CIRCLES OUT bring the corners in one after another and the middle circle last, with CUT, FADE or FLICKER.

LIVE CHART

How do I change a circle on the picture?

  1. Press EDIT at the top right of the picture. On a computer you can instead hold Option (Alt) and click a circle, which opens it straight away.
  2. Click a corner circle, or the middle circle when it is on. Its settings open beside it.
  3. Choose what it shows from the pictures: the chart's own WEDGES, the JOLLY ROGER, a live clock, visualizer or widget, or NONE. ON turns the circle off, BACKGROUND sets the color behind a widget, and for OSCILLOSCOPE GLOW, LINE COLOR sets the trace.
  4. MORE IN SETTINGS opens the same settings in the panel, with HUE SHIFT, BRIGHTNESS and the rest.
  5. Press Escape to close the circle's settings, and Escape again (or EDIT) to leave.

Outside EDIT the picture stays clean. In Studio, a Title Cards layer has the same EDIT on its picture.

EDIT, with a corner circle's settings open beside it

What do FILL and 4:3 change?

LAYOUT sets how the chart meets the edges of your video. FILL lays the gray field across the whole frame: on a wide video the corner circles and the gratings at the sides move out to its corners and edges, with the chart's white circle and everything in it in the middle. 4:3 keeps the chart as it was drawn, in its own box, with the title's BACKGROUND either side of a wide video.

Can I change the colors and the parts?

Yes. Under STYLE:

  • LINE INK colors the lines, the wedges, the bars and the numbers; PAPER COLOR the white circle and the chart's white parts; FIELD COLOR the field round the circle. The gray scales keep their places between the paper and the ink.
  • PAPER off lets the title's BACKGROUND show through the white circle and the field.
  • GRAY SCALES, CENTER SQUARE, WEDGES, DIAGONALS, GRATINGS, BARS, EDGE MARKS and NUMBERS each turn a part of the chart on or off. A bar with a name in it stays.

Can the paper be a moving shader?

Yes. Turn on STYLE → PAPER SHADER and pick the shader in BACKGROUND → BACKGROUND SHADER: any of Performer's built-in shaders or one you imported into its Shader Library. It runs as the chart's paper and shows through the big white circle, under the square, the wedges and the scales. The field and paper are the chart's background layer and everything drawn on them its title layer, so LAYER EFFECTS → BACKGROUND LOOK puts an FX Rack look on the paper alone.

How do I make a 1990s pirate or hacker screen?

Choose the PIRATE BROADCAST preset. It recolors the chart neon green on deep purple, sets PIRATE and SIGNAL in 8-bit letters in the black bars, stands the JOLLY ROGER over the square, sets the corner wedges turning and flickers the circles in. Under LAYER EFFECTS it puts MATRIX RAIN on the background and SIGNAL LOSS on the title, so the field rains green ASCII characters while the chart tears on the beat. To give the chart you have set up the same look, turn on STYLE → PIRATE MODE: your names and layout stay, and turning it off brings your colors back.

PIRATE BROADCAST

Can the chart move with the music?

Yes, when you ask it to; as set, it is a still reference. Everything that moves with the music is under MUSIC:

  • STEPS METER turns the four gray scales into level meters, lit from the dark step as far as the music's level reaches: the left and right scales in stereo, the top and bottom on the mix.
  • GRATINGS SPECTRUM opens the gratings band by band, mirrored left and right: the big gratings at the sides with the bass, the striped boxes at the top and bottom with the middle, and the small gratings beside the square with the treble.
  • SENSITIVITY, last in MUSIC, sets how strongly both answer the music. Every test card has the same one.

Under MOTION, CORNER SPIN turns the corner circles' wedges, the left ones one way and the right ones the other. With no music playing, the scales and gratings stand as drawn. A live visualizer or widget in a circle always moves with the music.

Can the names scroll like a marquee?

Yes. Under TEXT, turn on MARQUEE and the words in both black bars run through them from right to left and come round again, like a sign. Type a name or a whole sentence: the words keep their size and scroll instead of being squeezed to fit. MARQUEE SPEED sets how fast they run.

Does it work for vertical and square video?

Yes. Set MODULE → FORMAT to the shape you need, or choose FIT SCREEN to fill the window or projector. With FILL, a square or vertical video sets the white circle across the width and moves the corner circles into the corners, above and below it; where the frame is too narrow beside the circle, the side gratings step out.

Vertical 9:16

What is the tone, and how loud is it?

MUSIC → TONE plays a steady 1 kHz sine while the chart is up, as a station's test card did. It is off until you turn it on. TONE LEVEL sets it from −40 to −18 dBFS; −20 dBFS is the usual reference. You hear it in the Visualizer and in Performer, and in Studio's preview and render.

Can I play the chart on a laser or an oscilloscope?

Yes. In Title Cards, open LASER & SCOPE and click DOWNLOAD ILDA or DOWNLOAD XY WAV. The beam draws the white circle, the square's edge, a line across and a line down through the square along its wedges, the diagonals, the rim of each corner circle, the middle circle's rim and your TOP NAME. The field, the scales, the bars, the gratings and the fine lines of the wedges are left out, because a beam cannot fill and a frame holds only so many strokes. In OSC-1, the chart is under TEXT TOOLS → TITLE CARDS → CAMERA CHART, with your typed words in its bars.

Where does the Camera Chart come from?

It is the resolution chart American engineers drew up in 1956 to check how much detail a television camera or system could resolve, after an earlier chart for checking transmitters. Its wedges are numbered in TV lines: where a wedge's lines blur together is the most detail the picture holds. The gray scales check contrast, the circles and diagonals whether the picture is stretched or bent, and the striped boxes and bars how sharp its edges are. For how it came about, read the history of the Indian-head test pattern, and for its black and white cousin with a portrait, the Resolution Chart.

Good to know

  • The chart is redrawn from a public-domain copy of the 1956 chart, line for line. Its own title line is left out: your names stand in its black bars instead, and it carries no maker's or broadcaster's name or logo.
  • The numbers are set where the chart had them, in a face with the chart's own letter widths. The gray scales are numbered from 10 at the dark end to 2.
  • For a test card in color, see the Circle Card and the Picture Card; for exact level steps and safe areas, the Resolution Chart's CALIBRATION preset.