Resolution Chart
Make a black and white TV test pattern in your browser: a classic resolution chart with spinning wedges and your own channel number, or a round broadcast pattern labeled in real line counts for checking a screen, rendered as a video.
To make a TV test pattern, open Title Cards and choose MODULE → RESOLUTION CHART. You get the classic black and white chart: a big ring with a circle of line wedges in the middle, four corner circles, gray steps, scales, stepped bars and a portrait at the top. Put your channel number in its hubs, recolor it, set its wedges spinning, and render it as a video.
Open Title Cards
Choose RESOLUTION CHART under MODULE.
How do I make a TV test pattern with my channel number?
- Open Title Cards and choose MODULE → RESOLUTION CHART.
- Under STYLE, type your number in HUB NUMBER. It replaces the 30 in the middle of every circle.
- Set PAPER COLOR and LINE INK for your colors. The gray steps and the gray sectors stay in step between the two.
- Under MOTION, set SPIN to turn the middle circle's wedges and CORNER SPIN to turn the corners'.
- Choose RENDER, then RENDER VIDEO, and SAVE VIDEO when it reads VIDEO READY.
Which presets are there?
Each preset is a starting point; every setting can be changed after you choose one.
| Preset | What it is |
|---|---|
| CLASSIC | The chart as drawn, black on white, with the portrait at the top. |
| BLACK PAPER | Light lines on black, with an engraved eye on a dark disk at the top. |
| BLUEPRINT | Pale blue lines on blueprint blue, with BT in the hubs and a BT monogram at the top. |
| PHOSPHOR GREEN | Green on black like an old monitor, with a live Lissajous figure at the top, moving with the music. |
| SLOW SPIN | The chart with its wedges turning slowly: the middle one way, the corners in pairs. |
| LASER SIMPLE | Only the ring, the middle circle and the scales, in cyan on black: the parts a laser draws well. |
| BROADCAST WEDGES | A round broadcast pattern: four line wedges labeled in line counts, a target with a channel number, and your words. |
| CALIBRATION | The broadcast wedges in neutral grays with safe areas and level steps, for checking a screen or a capture. |
| BEAT RINGS | The chart with the rings in every hub and the stepped bars lighting red with the music. |
| PIRATE BROADCAST | A 1990s hacker screen: neon green on deep purple, a Jolly Roger in the middle circle, green ASCII rain behind the chart, the signal tearing on the beat, and the rings and bars flashing pink with the music. |
| LIVE CIRCLES | Every circle live: the radial spectrum in the middle, a radar, a globe, a phase wheel and a readout ring in the corners. |
| MATRIX | White lines on black, the paper and grid turned to falling green characters. |
How do I make the wedges spin?
Choose the SLOW SPIN preset, or set MOTION → SPIN and CORNER SPIN in degrees a second. SPIN turns the middle circle's wedges, its gray sectors and its numbers; the circle's rim stays still. Each shows while a circle it turns shows its wedges. CORNER SPIN turns the corner circles, the left two one way and the right two the other. Use Assign modulation on either to speed them up with the music.
Can I turn parts of the chart off or change the portrait?
Yes. Under STYLE, GRID, GRAY STEPS, SCALES, STEPPED BARS and NUMBERS each turn a part of the chart on or off, and each circle has its own switch, such as TOP LEFT CIRCLE ON. MEDALLION sets what stands at the top of the ring: the PORTRAIT, the EYE, the DARK EYE (an engraved eye on a dark disk, its lines in the medallion's MEDALLION BACKGROUND color), a MONOGRAM of up to three letters, YOUR ARTWORK (cut to the circle), a live clock, visualizer or widget, or NONE. Turn PAPER off to draw the chart's lines over the title's BACKGROUND: a color, your picture, a moving shader or the video under it.
Can I put a clock or a widget in the circles?
Yes. Each of the chart's five circles shows its own WEDGES until you pick something else for it under STYLE: MIDDLE CIRCLE, TOP LEFT CIRCLE, TOP RIGHT CIRCLE, BOTTOM LEFT CIRCLE and BOTTOM RIGHT CIRCLE. Pick the JOLLY ROGER, a clock (BROADCAST or CLOCK BRAUN), SPECTRUM ANALYZER · RADIAL, OSCILLOSCOPE GLOW, or a widget such as RADAR, GLOBE or DATA DIAL, live and moving with the music, or NONE. The circle's rim stays, so the chart keeps its shape.
A circle showing a widget or the Jolly Roger has its own BACKGROUND, with HUE SHIFT and BRIGHTNESS to move that color; use Assign modulation on either to pulse it with the music. Each circle's ON switch takes it off the chart and leaves the paper. Under MOTION, CIRCLES IN brings the circles in one after another as the chart comes on, with CUT, FADE or FLICKER: the corners first, then the middle circle, then the medallion. With OUT on, CIRCLES OUT takes them away as the chart goes.
How do I make a 1990s pirate or hacker screen?
Choose the PIRATE BROADCAST preset. It puts the JOLLY ROGER in the middle circle on a black face, recolors the chart neon green on deep purple, and under LAYER EFFECTS puts MATRIX RAIN on the background, so the paper and grid rain green ASCII characters, and SIGNAL LOSS on the title, so the chart tears and splits on the beat while the rain stays clean. RINGS REACT flashes the rings and the stepped bars pink with the music, and the corner circles flicker in and spin. The Station Ident and the Circle Card have a PIRATE BROADCAST preset too.
How do I turn my own chart into a pirate screen?
Turn on STYLE → PIRATE MODE. The chart you set up keeps its words, its numbers, its layout and its corner circles and medallion, and takes the pirate look: neon green on deep purple, the JOLLY ROGER on a black face in the middle circle, MATRIX RAIN behind the chart and SIGNAL LOSS over it. On BROADCAST WEDGES the lines and words turn neon on a purple disk and the Jolly Roger stands in the middle of the target. While it is on, the colors, the middle circle and the layer effects it sets leave the panel; turn it off and they come back with the chart exactly as you had it. Color Bars, the Station Ident and the Circle Card have the same switch.
Can I change the grid, the gray steps or the line weight?
Yes, under STYLE. At their defaults the chart is exactly as drawn.
- GRID DIVISIONS sets how many squares the grid has from top to bottom. At 9 it is the chart as drawn. Any other number redraws it as even squares that stop short of the circles, the ring, the steps, the scales and the bars.
- STEP COUNT sets how many gray steps stand either side of the ring, from 1 to 8, light at the frame's edge and dark by the ring. At 3 they are as drawn.
- LINE WEIGHT makes the grid, the diagonals, the steps' frames, the big ring and the rims of circles that show a widget heavier or lighter, from 25% to 300%. The wedges, the scales and the bars keep their drawing.
Can I put an effect on just the paper and the grid?
Yes. The chart draws in two layers: its paper and its grid are the background, and everything else is the title over it. Under LAYER EFFECTS, BACKGROUND LOOK puts any FX Rack look, a factory look or one you saved, on the paper and the grid alone, and TITLE LOOK puts one on the rest of the chart. BACKGROUND STRENGTH and TITLE STRENGTH blend each look with the plain layer.
Can the chart move with the music?
Yes. STYLE → RINGS REACT lights the rings in the middle of every circle with the music, from the center out, as far as the level reaches, in RING METER COLOR. It lights the stepped bars under the middle circle too: each bar from its middle out, as far as its own part of the sound reaches, the bass in the widest bar at the top and the treble in the narrowest. MOTION → IN SILENCE sets what they do with no music: SMOOTH MOVEMENT keeps them moving slowly, STILL holds them. Choose the BEAT RINGS preset to start from it.
How do I make a broadcast test pattern with my channel's name?
Choose the BROADCAST WEDGES preset, or set STYLE → DESIGN → BROADCAST WEDGES. You get a gray disk with four line wedges, a target of gray rings in the middle and black and white bars at the sides. Type your channel's name in TEXT → TOP WORDS and BOTTOM WORDS, and a place or tagline in BOTTOM LINE. CHANNEL NUMBER sets the number in the target; STYLE → CENTER swaps it for YOUR ARTWORK, the JOLLY ROGER or a live widget. Words you typed on another test card come with you when you choose MODULE → RESOLUTION CHART: a Station Ident's or a Circle Card's names fill TOP WORDS and BOTTOM WORDS, and a Station Ident's channel number and monogram fill the chart's. WEDGE LINES and WEDGE ANGLE set how many lines each wedge has and how wide it opens. FIELD COLOR, DISK COLOR, LIGHT COLOR and LINE INK set its colors; OUTER RING and SIDE BARS turn those parts on or off.
Can I use it to check my screen, projector or capture?
Yes, for resolution, black and white levels and overscan. Choose the CALIBRATION preset:
- LINE COUNTS labels each wedge where its lines are as fine as 720, 1080, 1440 and 2160 TV lines per picture height (a line and the gap beside it are two TV lines). Your output's own height is ringed. Show the chart full screen at that size: where the lines blur into gray is the most detail your screen, projector or capture keeps. On a 1080p output the lines stay apart down to about the ringed 1080, then break into a moiré.
- LEVEL STEPS draws two strips of exact grays: near black from 0 to 5% and near white from 95 to 100%. On a screen set up well every patch shows apart from its neighbor. Patches that merge with black mean crushed shadows; patches that merge with white mean clipped highlights.
- SAFE AREAS outlines action safe (93% of the frame) and title safe (90%), and draws a line at the frame's very edge. If that line is cut off, your screen overscans.
The chart is a quick check by eye. It does not measure color accuracy, gamma or brightness the way a colorimeter does.
Does it work for vertical and square video?
Yes. Set LAYOUT → FORMAT to the shape you need, or choose FIT SCREEN to fill the window or projector, a 4:3 one included. At 16:9 the chart is drawn exactly as designed. A 4:3 or square frame keeps the chart's height and its middle; the corner circles move into the frame's corners, as large as fits beside the ring. A vertical 9:16 frame sets the ring across the width, with two corner circles above it and two below.
What is the tone, and how loud is it?
MOTION → TONE plays a steady 1 kHz sine while the chart is up, as a station's test card did. It is off until you turn it on. TONE LEVEL sets it from −40 to −18 dBFS; −20 dBFS is the usual reference. You hear it in the Visualizer and in Performer, and in Studio's preview and render.
Can I play the chart on a laser or an oscilloscope?
Yes. In Title Cards, open LASER & SCOPE and click DOWNLOAD ILDA or DOWNLOAD XY WAV. The beam draws the middle circle and its hub, each wedge as nine lines, the two scales and the hub's number (a middle circle showing a widget, its rim alone); with BROADCAST WEDGES, the disk, nine lines a wedge, the target and your words. The paper and the gray fields are left out, because a beam cannot fill. SPIN turns the beam's wedges too. In OSC-1, the chart is under TEXT TOOLS → TITLE CARDS → RESOLUTION CHART, with your typed words in its hubs.
Where does the chart come from?
The chart follows the black and white test patterns American stations broadcast from about 1940 into the 1960s, before color. The best-known of them was printed on a metal plate inside a camera tube called a monoscope, so the picture was always sharp and framed. Its wedges showed how fine a detail a set could resolve, its circles and grid whether the picture was stretched or bent, and its gray steps the contrast. BROADCAST WEDGES follows the network bullseye patterns of the 1950s. For how the classic card was drawn and how stations used it, read the history of the Indian-head test pattern.
Good to know
- The chart was drawn for BeamTracer after the classic test cards of early television. It carries no broadcaster's or maker's logo.
- The portrait at the top is drawn in the style of old test cards; MEDALLION swaps it for the eye, a monogram, your own picture or nothing.
- The numbers on the chart are part of the drawing: HUB NUMBER changes the ones in the hubs, and NUMBERS turns them all off.
Station Ident
Make a technical difficulties screen, a please stand by card or a stream starting soon screen in your browser: a color test card with your own words, a countdown and an optional 1 kHz tone, rendered as a video.
Circle Card
Make a classic color TV test card in your browser: a big circle over a gray grid with color bars, gratings, gray steps and your channel's name, focus circles or live widgets in the corners, rendered as a video.