Indian-Head Test Pattern: Who Drew It and What It Tested
The Indian-head test pattern was RCA's black-and-white TV test card: a drawing of a Native American man in a feathered headdress, dated August 23, 1938, set inside circles, line wedges and gray steps. In the late 1940s and the 1950s, stations broadcast it before programs so engineers, servicemen and viewers could check a set's shape, focus, sharpness and contrast.
BeamTracer's Resolution Chart in Title Cards is drawn for BeamTracer on the same plan: a big ring, a circle of line wedges, four corner circles, gray steps and stepped bars, drawn at its own proportions, with your channel number in the hubs. Its BROADCAST WEDGES preset follows the round network patterns described below and carries your channel's name. The CLASSIC preset keeps a drawn portrait at the top, as the old card did; MEDALLION swaps it for your own picture, a monogram, an engraved eye, a live widget or NONE. Either preset renders as a video, and MOTION → TONE plays a steady 1 kHz tone while the card is up.
That is BeamTracer's own card, rendered from the BROADCAST WEDGES preset, not a historic pattern.
Who drew the Indian-head test pattern?
An artist known only as Brooks. The portrait is signed and dated August 23, 1938 (TV Tech; KLTV), and RCA set it inside a pattern of calibrated circles and lines at its plant in Harrison, New Jersey, in 1939 (Sarnoff Collection). Nobody has identified Brooks. According to collector Chuck Pharis, PBS's History Detectives spent six months on the question and could not answer it (TV Tech).
The RCA Indian-head test pattern. RCA, public domain, via Wikimedia Commons.
The drawing survived by chance. According to Pharis, who collects early TV cameras, a worker demolishing part of RCA's Harrison plant in the 1970s pulled a stack of artwork out of a dumpster and kept it on a closet shelf for about 30 years, and the worker's son later sold it to him (Pharis; TV Tech). According to a 2021 KLTV report, the original portrait is now on display at the Texas Broadcast Museum in Kilgore, Texas (KLTV). No other source we found confirms where it is today.
How did a monoscope tube broadcast the test pattern?
Stations needed no camera for it. RCA printed the pattern on an aluminum plate inside a monoscope, a tube built like a small picture tube with the plate where the screen would be. An electron beam scanned the plate: bare metal gave a strong signal (white), and the carbon left by the printed lines gave a weak one (black) (LabGuy's World; TV Tech). The plate held no true grays, so the grays were printed as fine dots or lines that the video circuits smoothed out.
After the war, RCA sold the pattern in its 2F21 monoscope, whose data sheet is dated June 20, 1946 (data sheet). According to the Museum of the Broadcast Television Camera, the tube went into RCA's TK-1 series of monoscope cameras, starting with the TK-1A around 1946 (tvcameramuseum.org). The monoscope was always framed and in focus, and it put the pattern on the air without tying up a studio camera (Sarnoff Collection). For an extra fee, RCA printed a station's call letters, city and channel on the plate (TV Tech; Early Television Museum). Stations also kept printed cards of the pattern for a studio camera to shoot (Sarnoff Collection).
What did each part of the Indian-head test pattern test?
Each part checked one adjustment on the set or the transmitter. A January 1949 Radio & Television News article by M. S. Kay walked TV servicemen through them (text at RF Cafe):
- The big circle and the grid set the picture's shape. The circle's diameter is three quarters of the picture's width, so on a 4:3 screen it just touches the top and bottom, and the grid is 8 squares across by 6 down.
- The circles showed linearity. An egg-shaped circle meant the beam swept faster across one part of the screen than another.
- The four wedges measured sharpness and set the focus. The point where the lines blurred together was the limit of detail, and the numbers beside them counted hundreds of lines (30 meant 300).
- The portrait and the gray wedges set contrast and brightness. The head should look naturally shaded, with each gray step distinct from the next.
- The fine diagonal lines in the center checked interlace. Jagged lines meant the two halves of each frame were not falling between each other.
- The blocks and bars at the sides and bottom showed ringing and smearing in the set's amplifiers.
The pattern labeled for TV owners, from Jack H. Kubanoff, "Use test pattern to align your TV set," Radio & Television News, May 1950. Public domain, via Wikimedia Commons.
How did stations and viewers use the test pattern?
Stations sent it every day before programs began. According to Kay's 1949 article, every station transmitted the pattern before its broadcast hours, which then filled only a few hours of the evening. Many also ran nothing but the pattern for three or four hours in the morning or afternoon, with a 400-cycle tone or music, so servicemen could install sets and aim antennas on a real signal.
RCA's service writer John R. Meagher wrote in November 1948 that no single pattern was standard: "The nearest thing to a standard is the RCA 'Indian head' monoscope" (Radio-Electronics, November 1948). He also described owners who held a plate against the screen to check that the circle was round, which made trouble for technicians, since some stations' own circles were not perfectly round.
What were the NBC bullseye patterns and the EIA resolution chart?
The Indian-head pattern was one of several American patterns. Meagher's article used NBC's pattern as its example: concentric circles and arcs for linearity and centering, four line wedges with calibration dots for resolution, and shading blocks for contrast (Radio-Electronics). Kay's article shows station patterns from WBKB in Chicago and WNBT in New York, each with its call letters, and the Smithsonian's National Museum of American History holds an NBC WNBT test pattern slide in its Allen B. Du Mont Collection.
Engineers also had a chart for checking transmitters, developed by a Radio Manufacturers Association committee (Kay). The association proposed it as the standard resolution chart, but by 1948 stations had not adopted it for air use (Meagher). A 1956 chart under the RETMA name followed (NASA, 1966), later known as the EIA resolution chart. According to Wikipedia, it closely follows the 1946 design and is still used to test camera resolution.
A redrawing of the 1956 RETMA (later EIA) resolution chart. Public domain, via Wikimedia Commons.
BeamTracer's BROADCAST WEDGES preset is drawn after the round network patterns: a gray disk, four line wedges, a target with your channel number and black and white bars at the sides. Its CALIBRATION preset labels the wedges in TV lines per picture height, from 720 to 2160, for checking how much detail a screen, projector or capture keeps.
Why did the Indian-head test pattern disappear?
Color television made it obsolete. A monoscope makes only a black-and-white picture, and as sets needed less adjusting from the late 1950s, stations showed the pattern less often. In the 1960s, as stations converted to color, it gave way to color patterns, later standardized as SMPTE color bars (Sarnoff Collection; Wikipedia). Later, round-the-clock programming ended most nightly sign-offs. The Sarnoff Collection calls the pattern a symbol of early American television.
Why is the Indian-head portrait controversial?
The drawing is a generic figure; no source identifies a real sitter or a particular nation. Media historian Paulette Kilmer, writing in Journalism History in 2023, argues that the drawing reduced many Native nations to one stock character in a war bonnet, built from outsiders' assumptions, much like the carved figures that once stood outside tobacco shops. She also acknowledges that many viewers remember it fondly (Journalism History). Comanche scholar Dustin Tahmahkera's Tribal Television (2014) traces Native people on American TV from the test pattern, which stations used at sign-on and sign-off, to modern sitcoms (University of Illinois).
How do I make a test pattern like it with my own channel name?
Open the Resolution Chart in BeamTracer Title Cards with the BROADCAST WEDGES preset, type your channel's name and number, choose your colors, and render it as a video. The guide to retro TV test cards covers the other cards.
- Open the Resolution Chart with BROADCAST WEDGES, or choose MODULE → RESOLUTION CHART and the BROADCAST WEDGES preset.
- Type your channel's name in TEXT → TOP WORDS and BOTTOM WORDS, and a place or tagline in BOTTOM LINE (broadcast pattern settings).
- Set CHANNEL NUMBER, or use STYLE → CENTER to put YOUR ARTWORK in the target.
- Set FIELD COLOR, DISK COLOR, LIGHT COLOR and LINE INK for your colors.
- Choose RENDER, then RENDER VIDEO, and SAVE VIDEO when it reads VIDEO READY.
For the steady tone a station played with its card, turn on MOTION → TONE and set TONE LEVEL; −20 dBFS is the usual reference (tone settings). For the classic layout, choose the CLASSIC preset and type your number in STYLE → HUB NUMBER (classic chart settings). To check a screen, start from CALIBRATION instead (calibration settings).
BeamTracer is not affiliated with or endorsed by RCA, NBC or the Electronic Industries Alliance.