Picture Card
Make a classic TV test card with a picture in the middle: a gray grid in a frame of color bars, hatched corners, gray steps, gratings and your caption, with the Jolly Roger, your own photo or a live visualizer in the circle.
To make a TV test card with a picture in the middle, open Title Cards and choose MODULE → PICTURE CARD. You get a round picture in the middle of a gray grid, framed in color bars, with hatched corners, a column of gray steps on one side, fine gratings on the other and a box for your caption. It opens with an oscilloscope drawing your music in the circle; put the Jolly Roger, your own picture or another live visualizer there instead, set it at 4:3 or 16:9, and render it as a video.
Open Title Cards
Choose PICTURE CARD under MODULE.
How do I make a test card with a picture in the middle?
- Open Title Cards and choose MODULE → PICTURE CARD.
- Under STYLE, pick what the circle shows in PICTURE: the OSCILLOSCOPE GLOW it opens with, the JOLLY ROGER, YOUR PICTURE, another live clock, visualizer or widget, or NONE.
- For your own picture, pick YOUR PICTURE and load a PNG, a JPEG or an SVG in PICTURE ARTWORK. It is cut to the circle. Until you load one, a faint stand-in face shows where it goes.
- Under TEXT, type your channel's or show's name in the box under CAPTION, or a longer message with MARQUEE on. If you typed a name on another test card first, it is already there: words follow you when you change MODULE from one test card to another.
- Choose RENDER, then RENDER VIDEO, and SAVE VIDEO when it reads VIDEO READY.
Which presets are there?
Each preset is a starting point; every setting can be changed after you choose one.
| Preset | What it is |
|---|---|
| LIVE VISUALIZER | The 16:9 card with an oscilloscope in the circle drawing the music, and the strip, gratings, marker and frame colors moving with it. Choosing PICTURE CARD opens it. |
| PICTURE CARD | The 4:3 card with the Jolly Roger on a black circle, set in the middle of a wide frame. |
| PICTURE CARD HD | The 16:9 card across the whole frame, with a gray ramp and a hue ramp along the bottom and the video's line count in the caption. |
| YOUR FACE | YOUR PICTURE in the circle, on blue: load your photo in PICTURE ARTWORK. |
| AGED PAPER | Every color turned to sepia, like an old printed card, with finer corners and a serif caption. |
| MIDNIGHT | Navy and pale blue, a gray frame and a clock in the circle. |
| SCOPE GREEN | Every color a shade of green, like an old monitor, with an oscilloscope in the circle. |
| LASER SIMPLE | Cyan lines on black, with no paper, frame, strip or gratings: close to what a laser draws. |
| PIRATE BROADCAST | A 1990s hacker screen: neon on deep purple, PIRATE SIGNAL in 8-bit letters, the Jolly Roger in the circle, green ASCII rain behind the card and the frame's bars tearing on the beat. |
Can I put my own picture or a live visualizer in the circle?
Yes. STYLE → PICTURE sets what the circle shows: the JOLLY ROGER, YOUR PICTURE, a live clock, visualizer or widget that moves with the music (SPECTRUM ANALYZER · RADIAL, CLOCK BRAUN, OSCILLOSCOPE GLOW, RADAR, GLOBE and more), or NONE. OSCILLOSCOPE GLOW draws a white trace to match the card; set PICTURE LINE COLOR to GREEN for phosphor green, as SCOPE GREEN does, or to BLUE, PURPLE, ORANGE or CYAN. With YOUR PICTURE, load the picture in PICTURE ARTWORK; it fills the circle and stays when you choose another preset. PICTURE ON turns the circle off and leaves the grid. The circle has its own PICTURE BACKGROUND, the color behind a widget, the Jolly Roger or a picture that does not fill it, with PICTURE HUE SHIFT and PICTURE BRIGHTNESS to move that color; use Assign modulation on either to pulse it with the music. Under MOTION, CIRCLES IN and CIRCLES OUT bring the picture in and out with CUT, FADE or FLICKER.
How do I change a circle on the picture?
- Press EDIT at the top right of the picture. On a computer you can instead hold Option (Alt) and click a circle, which opens it straight away.
- Click a circle: PICTURE, the one in the middle. Its settings open beside it.
- Choose what it shows from the pictures: the card's own drawing, the JOLLY ROGER, a live clock, visualizer or widget, or NONE. ON turns the circle off, BACKGROUND sets the color behind it, and for OSCILLOSCOPE GLOW, LINE COLOR sets the trace: WHITE to match the card, GREEN, BLUE, PURPLE, ORANGE or CYAN.
- MORE IN SETTINGS opens the same settings in the panel, with HUE SHIFT, BRIGHTNESS and the rest.
- Press Escape to close the circle's settings, and Escape again (or EDIT) to leave.
Outside EDIT the picture stays clean. The ring that moves, turns and sizes the whole card shows only in EDIT too: drag its center dot to move the card, and its handle to turn and size it. A click inside the ring still reaches the circle under it. In Studio, a Title Cards layer has the same EDIT on its picture.
What do 4:3 and 16:9 change?
LAYOUT sets the card's shape. 4:3 is the card a 4:3 television showed: on a wide video it stands in the middle with the title's BACKGROUND either side, and its bottom edge is a row of green and black checks. 16:9 fills a wide video, with more of the grid either side, a gray ramp and a hue ramp along the bottom, and room for TEXT → LINE COUNT, which adds the video's height in lines after your caption: 1080 LINES for a 1080p render, 2160 LINES for 4K.
Can I change the frame, the grid and the colors?
Yes. Under STYLE:
- FRAME COLORS sets the band round the card: COLOR (color bars along the top, colored blocks down the sides, checks or ramps along the bottom, and a marker at the middle of each edge), GRAY (each block a gray of its own brightness), or NONE to run the grid to the edge.
- PAPER COLOR is the gray of the grid's cells, LIGHT COLOR the grid's lines, the circle's rim, the corners' lines and the top box, and DARK COLOR the section lines, the corner bands, the caption's box and the bottom of the gray strip. MONOCHROME turns every other color into a shade between the two, for a sepia card, a green screen or plain black and white.
- GRID turns the grid's lines and dark section lines off. CORNERS draws the corner bands HATCHED, FINE (twice the lines) or NONE.
- GRAY STRIP and STRIP STEPS set the column of grays left of the circle, from 2 to 12 steps; GRATINGS the column of fine lines right of it, finer from the top down, where you can see a screen or a video lose detail; TOP BOX the light box above the circle.
- PAPER off lets the title's BACKGROUND show through the grid.
Can the paper be a moving shader?
Yes. Turn on STYLE → PAPER SHADER and pick the shader in BACKGROUND → BACKGROUND SHADER: any of Performer's built-in shaders or one you imported into its Shader Library. It becomes the grid's paper and moves with the music under the grid and everything on it. The Resolution Chart and the Circle Card have the same switch, and a Station Ident has it as PAPER STYLE → SHADER.
Can I put an effect on just the background?
Yes. The paper, the grid and the frame are the card's background layer, and the picture, the corners, the strip, the gratings, the top box and the caption are its title layer. Under LAYER EFFECTS, BACKGROUND LOOK puts any FX Rack look, a factory look or one you saved, on the background alone, and TITLE LOOK on the rest; BACKGROUND STRENGTH and TITLE STRENGTH blend each look with the plain layer.
How do I make a 1990s pirate or hacker screen?
Choose the PIRATE BROADCAST preset. It puts the JOLLY ROGER in the circle, recolors the card neon green on deep purple with PIRATE SIGNAL in 8-bit letters, and under LAYER EFFECTS puts MATRIX RAIN on the background, so the paper, grid and frame rain green ASCII characters, and SIGNAL LOSS on the title, so the card tears and splits on the beat while the rain stays clean. BARS MOTION → GLITCH tears the frame's color bars sideways on the beat, and the picture flickers in.
How do I turn my own card into a pirate screen?
Turn on STYLE → PIRATE MODE. The card you set up keeps its caption, its layout and its frame, and takes the pirate look: neon green on deep purple, the JOLLY ROGER in the circle, MATRIX RAIN behind the card and SIGNAL LOSS over it. While it is on, the colors, the picture and the layer effects it sets leave the panel; turn it off and they come back with the card exactly as you had it. Every test card has the same switch.
Can the card move with the music?
Yes, when you ask it to; as set, it is a still reference. Everything that moves with the music is under MUSIC. BARS MOTION moves the color bars along the top of the frame with the music, as Color Bars' rows do: SPECTRUM, LEVEL, PULSE, PARADE, GLITCH and more. Every other part of the card can join in, each with its own switch:
- STRIP METER turns the gray strip into a level meter: the steps show from the bottom up as the music gets louder, and only the loudest passages reach the bright top step.
- GRATINGS SPECTRUM makes each block of gratings a band of the spectrum, the bass at the top in the widest lines down to the treble at the bottom in the finest. Each block's lines run across as far as its band is loud.
- TOP MARKER moves the green marker in the top box. BALANCE follows the music between the left and right speakers. METRONOME swings it to one end of the bar and back on every beat, in time with the song.
- COLOR PARADE marches the frame's colors around the card by one color on every beat: the color blocks down the sides on either layout, and the rainbow ramp under a 16:9 card.
- SENSITIVITY, last in MUSIC, sets how strongly all of them answer the music. Every test card has the same one.
The LIVE VISUALIZER preset has all four on. With no music playing, everything on the card stands as drawn. A live visualizer or widget in the circle always moves with the music.
Can the caption scroll like a marquee?
Yes. Under TEXT, turn on MARQUEE and the caption's words run through the box from right to left and come round again, like a sign. Type a name or a whole paragraph in the box under CAPTION: the words keep their size and scroll instead of being squeezed to fit. MARQUEE SPEED sets how fast they run. On a laser, the beam draws the words that are wholly inside the box as they pass.
Does it work for vertical and square video?
Yes. Set MODULE → FORMAT to the shape you need, or choose FIT SCREEN to fill the window or projector. The frame always runs round the edge and the grid fills it; the circle, the strip, the gratings, the top box and the caption stay together in the middle. A square or vertical frame sets them a little smaller so they fit across, and the grid runs on above and below.
What is the tone, and how loud is it?
MUSIC → TONE plays a steady 1 kHz sine while the card is up, as a station's test card did. It is off until you turn it on. TONE LEVEL sets it from −40 to −18 dBFS; −20 dBFS is the usual reference. You hear it in the Visualizer and in Performer, and in Studio's preview and render.
Can I play the card on a laser or an oscilloscope?
Yes. In Title Cards, open LASER & SCOPE and click DOWNLOAD ILDA or DOWNLOAD XY WAV. The beam draws the grid's edge and its dark section lines, the circle's rim, the top box and your caption. Turn on MOTION → MARKER ON THE LASER to draw the top box's moving marker on the beam too, swinging with METRONOME or following BALANCE. The paper, the frame, the corner bands, the strip and the gratings are left out, because a beam cannot fill. In OSC-1, the card is under TEXT TOOLS → TITLE CARDS → PICTURE CARD, with your typed words in its caption.
Where does the Picture Card come from?
The card follows the picture test cards of color television from the late 1960s on: a gray grid in a frame of color bars, with gray steps, fine gratings and a photograph in a circle in the middle. Engineers lined up cameras and screens with them, and for years they filled the hours a channel was off the air. For how the best-known one was made and used, read the history of the picture test card.
Good to know
- The card was drawn for BeamTracer after the picture-in-the-middle test cards of broadcast television, at its own proportions. It carries no broadcaster's or maker's logo, letter or name, and no photograph: the picture is yours to choose.
- The grays, gratings and color blocks are flat colors on the card's own grid, so they work for a stand-by screen and a rough look at a display; for measuring a screen, the Resolution Chart's CALIBRATION preset has exact level steps and safe areas.
For a full-size UHD download, follow Where can I get a 4K test card with my own channel name?. It covers 3840×2160 export, range selection and checks for cropping or soft lines.
Circle Card
Make a classic color TV test card in your browser: a big circle over a gray grid with color bars, gratings, gray steps and your channel's name, focus circles or live widgets in the corners, rendered as a video.
Camera Chart
Make the classic 1956 camera resolution chart in your browser: line wedges, gray scales, gratings and corner circles in a big white circle, with your names in its black bars, live widgets in its circles and parts that move with your music, rendered as a video.