Station Ident
Make a technical difficulties screen, a please stand by card or a stream starting soon screen in your browser: a color test card with your own words, a countdown and an optional 1 kHz tone, rendered as a video.
To make a technical difficulties screen, open Title Cards, choose MODULE → STATION IDENT, and pick the PLEASE STAND BY preset. You get a color test card with a ring, a color wheel and four medallions, a round sign across the middle that reads PLEASE STAND BY, and a steady 1 kHz tone. Type your own words on the sign, change the card's lettering to your channel's name, and render it as a video.
Open Title Cards
Choose STATION IDENT under MODULE.
How do I make a please stand by screen?
- Open Title Cards and choose MODULE → STATION IDENT.
- Under PRESETS, choose PLEASE STAND BY.
- Under TEXT, type your words in PLATE TEXT. Each line you type is a line on the sign.
- Type your channel's name in TOP LETTERING TEXT and BOTTOM LETTERING TEXT, the two words around the ring.
- Under MOTION, turn TONE off if you want silence, or set TONE LEVEL.
- Choose RENDER, then RENDER VIDEO, and SAVE VIDEO when it reads VIDEO READY.
How do I make a stream starting soon screen with a countdown?
Choose the STARTING SOON preset. The sign reads STARTING SOON and counts down from 5:00 to 00:00, and the color wheel under it turns slowly. Set TEXT → COUNT FROM to the minutes you want, from half a minute to an hour. The countdown starts when the card comes on and holds at 00:00. Turn COUNTDOWN on under any sign to add it.
Which presets are there?
Each preset is a starting point; every setting can be changed after you choose one. Every preset but CLASSIC and PIRATE BROADCAST opens with live widgets or a visualizer in two of its circles, moving with the music, so one click shows what the circles can hold. Change any of them under STYLE.
| Preset | What it is |
|---|---|
| CLASSIC | The full color card: BEAM and TRACER around the ring, a red TEST tumbling along the middle line, the BeamTracer mark in gray facets in the wheel, a portrait and an eye in the ring, and four corner medallions. |
| PLEASE STAND BY | The card with a black sign that reads PLEASE STAND BY, and the 1 kHz tone on. A READOUT RING and a RADAR turn in two corners. |
| STARTING SOON | A blue sign with STARTING SOON and a countdown from 5:00, and a turning wheel, with a DATA DIAL and the radial spectrum in the corners. |
| BE RIGHT BACK | A red sign that reads BE RIGHT BACK, with a spinning PLATTER and an ORBIT SEAL. |
| MIDNIGHT | The card in reverse: light lines on night blue, with a GLOBE and CLOCK BRAUN, a live clock, in the corners. |
| PUBLIC ACCESS | Pale blue paper, COMMUNITY TV around the ring and channel 23 in the middle, with a RADAR CHART and a READOUT RING. |
| KIDS CHANNEL | Yellow paper, FUN TIME, an iris, a SUNBURST, a PHASE BLOOM and a fast-turning wheel. |
| PIRATE BROADCAST | A 1990s hacker screen: PIRATE SIGNAL in 8-bit letters, a Jolly Roger on a black flag in the middle, green ASCII rain behind the card, every color cycling fast, the signal tearing and splitting, the ring flashing with the music and the words decoding in. |
| SCOPE MUSIC | Phosphor green on black: OSCILLOSCOPE GLOW, two waveforms and a LISSAJOUS 3D figure, all moving with the music. |
| CHROME | Silver line art and lettering on black, gray medallions with a HUD ring and a VECTOR COMPASS, and an orange-red wordmark, with no color wheel. |
| THANKS FOR WATCHING | A green sign that reads THANKS FOR WATCHING, for the end of a stream, with RADIAL BARS and a NODE RING. |
| PLASMA | The card over a moving Performer shader, PLASMA, that follows the music, with an INTERFERENCE LENS and a PHASE WHEEL. |
How do I put my own channel name and logo on the card?
- TEXT → TOP LETTERING and BOTTOM LETTERING are the two words around the ring. A longer word is set narrower, then smaller, to fit its arc.
- TEXT → WORDMARK is the red word that tumbles along the middle line.
- STYLE → EMBLEM sets what stands in the wheel: BEAMTRACER, CHANNEL NUMBER (type it in CHANNEL NUMBER), JOLLY ROGER (a grinning skull over crossed bones), YOUR ARTWORK (add a PNG or an SVG in EMBLEM ARTWORK) or NONE. EMBLEM FRAME puts it in a SQUARE or a CIRCLE, and EMBOSS raises it in gray facets; turn EMBOSS off for a plain flat face in EMBLEM COLOR with the logo in LINE INK. Any of the three logos stands in either frame.
- STYLE → TOP MEDALLION and BOTTOM MEDALLION set the two pictures in the ring: PORTRAIT, EYE, DARK EYE (an engraved eye on a dark disk, its lines in the medallion's BACKGROUND color), MONOGRAM (up to three letters in MONOGRAM), YOUR ARTWORK (cut to the circle), a live clock, visualizer or widget, or NONE.
- When a word around the ring has an O, the ring's medallion stands in for it, as on the original card. Turn TOP MEDALLION ON or BOTTOM MEDALLION ON off and the O is a letter again.
- Your words come with you when you choose another test card under MODULE: the two words around the ring go to the Circle Card's two name boxes and the Resolution Chart's broadcast words, the channel number and the monogram to the Resolution Chart's, and the PLATE words to the Color Bars' IDENT PLATE. The words a card comes with stay behind, so a card you have not typed on opens as it always does.
Can I change the medallions and the colors?
Yes. STYLE has a medallion choice and a background color for each corner: TOP LEFT MEDALLION, TOP RIGHT MEDALLION, BOTTOM LEFT MEDALLION and BOTTOM RIGHT MEDALLION. Each can be POLAR GRID, BRACKETS, REEL, CROSSHAIR, IRIS, WAVEFORM (it draws the music that is playing), CLOCK (it keeps the time the card has been up, from MOTION → CLOCK START), a live clock, visualizer or widget (next question), or NONE. Each corner's ON switch hides it, and its HUE SHIFT and BRIGHTNESS turn and light its background; use Assign modulation on either to move the color with the music. PAPER and PAPER CENTER color the card, LINE INK its lines and rims, and RING COLOR the ring under the ticks. GRID, RING TICKS, SCALES, RING SHADOW and COLOR WHEEL each turn a part of the card on or off. WHEEL ANGLE turns the wheel; MOTION → WHEEL SPIN keeps it turning.
Can a medallion show a live clock or a visualizer?
Yes. All six circles, the four corners and the two in the ring, list live pictures after the card's own designs. Each one moves with the music:
- Clocks and visualizers: BROADCAST (an LED broadcast clock), CLOCK BRAUN (a glass wall clock, without its wordmark), SPECTRUM ANALYZER · RADIAL (the spectrum around a ring) and OSCILLOSCOPE GLOW (a scope screen cut round).
- Dials: DATA DIAL, READOUT RING, RADAR, SUNBURST, GLOBE, NODE GRAPH, NODE RING, LISSAJOUS 3D, GEAR, RADIAL BARS, RADAR CHART, PLATTER, and the instrument dials ORBIT SEAL, VECTOR COMPASS, PHASE WHEEL, PHASE BLOOM, ORBIT LOOM, FLUX GATE, APERTURE GATE and INTERFERENCE LENS.
- HUD rings: TARGET RING, HEADING RINGS, TARGET CORE, FLIGHT HUB and MAP DISC.
Each draws on the circle's background color, in LINE INK or PAPER, whichever stands out more on it. The scope keeps its own dark screen. In a Studio render, the two clocks are left out and their circles show their background; the Visualizer's RENDER VIDEO draws them.
Can the ring and the wheel move with the music?
Yes. STYLE → RING REACTS lights the castellated ring from twelve o'clock round as far as the level reaches, in RING METER COLOR. STYLE → WHEEL REACTS lights each color of the wheel with its part of the spectrum and steps the wheel round on each beat. MOTION → IN SILENCE sets what they do with no music: SMOOTH MOVEMENT keeps them moving slowly, STILL holds them.
Can I move or resize the corner medallions?
Yes. LAYOUT → MEDALLION LAYOUT sets them AS DRAWN, beside the ring as on the card, or out in the FRAME CORNERS of a wide picture. LAYOUT → MEDALLION SIZE scales all four together, from 50% to 150%, to balance them against the ring; assign modulation to pulse them with the music. The picture above shows FRAME CORNERS.
How do the circles and words come on?
Under MOTION, CIRCLES IN brings the six circles in one after another with CUT, FADE or FLICKER, and TEXT IN brings the words in with CUT, TYPE, RANDOM CHARACTERS or FADE, taking TEXT IN TIME each. With MOTION → OUT on, CIRCLES OUT and TEXT OUT take them away the same ways as the card goes. Change any of these and the preview plays it at once: a way in plays the card's arrival again, and a way out takes the card away and brings it back. If the music is paused, it starts so you see the change.
How do I play the card's animation again?
While music plays, the card's parts sit on the music bar of the NOW PLAYING player under the picture, starting where you chose the card: IN while it arrives, ON SCREEN while it stays up, and OUT when it leaves. The music's playhead runs across them, so the card plays, pauses and jumps with the music. Pause the music to hold the card where it is, or click a part to play the music from there. Hover a part to see what it is and how long it lasts.
Changing a MOTION setting plays that part at the playhead, and starts the music if it is paused. A crawl, end credits, an Upside-Down Title's opening and a countdown leader show their whole run as one part: CRAWL, CREDITS, OPENING or COUNTDOWN. A card on SHOW → TIMELINE sits on the song at its START AT time. With no music loaded, the player shows the card's own bar, with a play button that pauses and plays the card.
How do I make a 1990s pirate or hacker screen?
Choose the PIRATE BROADCAST preset. It puts Performer's MATRIX RAIN look on the background, so the paper rains green ASCII characters behind the card, and SIGNAL LOSS on the title, so the card tears and splits on the beat while the rain stays clean. MOTION → COLOR CYCLE turns the paper and every circle's background round the color wheel, in degrees a second: slow for a drift, fast for a flashing screen. STYLE → PAPER STYLE swaps the printed card for STARS (a pixel starfield), LOADING LINES (the stripes a home computer flashed while a tape loaded), RASTER BARS (colored bars swinging up and down) or SHADER. For more glitch over the whole picture, choose PIRATE SIGNAL under PRESET COMBINATIONS after the preset; it keeps the words you have typed.
How do I turn my own card into a pirate screen?
Turn on STYLE → PIRATE MODE. The card you set up keeps its words, its layout and its corner and ring medallions, and takes the pirate look: neon green on deep purple, the JOLLY ROGER on a black flag in the wheel, MATRIX RAIN behind the card and SIGNAL LOSS over it. While it is on, the colors, the emblem and the layer effects it sets leave the panel; turn it off and they come back with the card exactly as you had it. Color Bars, the Resolution Chart and the Circle Card have the same switch.
Can I put an effect on just the background or just the title?
Yes, in any Title Cards module. A title draws in two layers: the background (the paper, or the BACKGROUND you chose) and the title over it. Under LAYER EFFECTS, BACKGROUND LOOK puts any FX Rack look, a factory look or one you saved in the FX Rack, on the background alone, and TITLE LOOK puts one on the title alone. BACKGROUND STRENGTH and TITLE STRENGTH blend each look with the plain layer; assign modulation to move them with the music. The other layer is drawn exactly as it was, so the card stays sharp over an ASCII or glitching background.
Can the background be a moving shader?
Yes. Set BACKGROUND → SHADER, or on a Station Ident STYLE → PAPER STYLE → SHADER, and pick a shader in BACKGROUND SHADER: any of Performer's built-in shaders or one you imported into its Shader Library. It runs behind the title and moves with the music. Choose the PLASMA preset to start from one. A BACKGROUND LOOK then treats the shader too.
What is the tone, and how loud is it?
MOTION → TONE plays a steady 1 kHz sine while the card is up, as a station's test card did. It is off until you turn it on, except in the PLEASE STAND BY preset. TONE LEVEL sets it from −40 to −18 dBFS; −20 dBFS is the usual reference. You hear it in the Visualizer and in Performer, and in Studio's preview and render. In Studio the tone follows the card: from the start with TRIGGER → SHOW → ALWAYS, or for the card's span on the TIMELINE.
Does it work for vertical and square video?
Yes. Set LAYOUT → FORMAT to the shape you need, or choose FIT SCREEN to fill the window or projector, a 4:3 one included. At 16:9 the card is drawn exactly as designed. A 4:3 frame keeps the ring at full height. A square frame sets the card a little smaller so the medallions stay clear of the ring. A vertical 9:16 frame sets the ring across the width, with two medallions above it and two below. The paper and its grid always fill the frame.
Can I play the card on a laser or an oscilloscope?
Yes. In Title Cards, open LASER & SCOPE and click DOWNLOAD ILDA or DOWNLOAD XY WAV. The beam draws the ring's edges, the wheel, the diagonal scale, the ring's medallions, the crosshair medallion and the words; the paper and the colored fills are left out, because a beam cannot fill. With a sign up, the beam draws the sign's words in place of the ring's lettering. The SCOPE MUSIC preset shows a card made for a scope on screen. In OSC-1, the card is under TEXT TOOLS → TITLE CARDS → STATION IDENT, with your typed words around the ring.
Where does the card come from?
The card is drawn after a color test-card graphic from the early days of desktop video, in the 1990s, when a personal computer first brought broadcast effects to small studios. Its ring and wheel follow the round broadcast cards of the decades before, and its four medallions sit where those cards had their corner circles. The lettering and the emblem are BeamTracer's own. For why stations broadcast test cards and stand-by screens at all, read why TV had test patterns.
Good to know
- The card was drawn for BeamTracer after the classic test cards of early television. It carries no broadcaster's or maker's logo.
- The portrait in the top medallion is drawn in the style of old test cards; TOP MEDALLION swaps it for the eye, a monogram, your own picture or nothing.
- The sign covers the wheel and the emblem; the numbers it would cover are left out with it.
- The countdown and the clock count from when the card comes on, so a render starts them from the beginning.
Countdown Leader
Make an old film countdown in your browser: any start number, a sweep and rings or a plain modern count, timed in seconds, film feet or your song's tempo, with an optional 2-pop beep, on green screen or on a laser.
Resolution Chart
Make a black and white TV test pattern in your browser: a classic resolution chart with spinning wedges and your own channel number, or a round broadcast pattern labeled in real line counts for checking a screen, rendered as a video.