← BACK TO BLOG

How to Make a Retro TV Test Card with Your Channel Name

To make a retro TV test card, open BeamTracer Title Cards, choose a card under MODULE (STATION IDENT, RESOLUTION CHART, CIRCLE CARD or COLOR BARS), type your channel's name into its lettering, and render it as a video with RENDER VIDEO. Each card is drawn for BeamTracer after a classic one, and three of them add an optional 1 kHz tone.

Every card on this page is BeamTracer's own, drawn in the browser at your output's size. None of them carries a broadcaster's or maker's logo; where an old card had a station's name or a photograph, yours takes your words, your picture or a live widget. The cards run in the Visualizer and render to video, and the Station Ident, Resolution Chart and Circle Card also play on a laser or an oscilloscope.

How do I make a TV test card with my channel name?

Open Title Cards, pick a test card, and type your words where the card's lettering goes. The Station Ident below is the quickest start: its two words arc around the ring, and its presets cover the stand-by and starting-soon screens people ask for most.

  1. Open Title Cards and choose MODULE → STATION IDENT.
  2. Under PRESETS, choose CLASSIC, PLEASE STAND BY or STARTING SOON.
  3. Type your channel's name in TEXT → TOP LETTERING TEXT and BOTTOM LETTERING TEXT.
  4. Set LAYOUT → FORMAT to the shape you need: 16:9, square, 4:5 or vertical 9:16. FIT SCREEN fills the window, a 4:3 one included.
  5. Under MOTION, turn TONE on or off and set TONE LEVEL.
  6. Choose RENDER, then RENDER VIDEO, and SAVE VIDEO when it reads VIDEO READY.

Every setting on the card is in the Station Ident guide. The other three cards work the same way: pick the module, pick a preset, type your words.

Which test card should I pick?

Pick by the look you remember. Each BeamTracer card follows the structure of a family of real test cards, and each has its own history post.

BeamTracer cardWhat it looks likeThe cards it follows
Station IdentA cream color card with a ring, a color wheel and four round medallionsColor test-card graphics from the early days of desktop video (the Video Toaster card)
Resolution ChartA black and white chart with line wedges, circles, a grid and gray stepsThe American monochrome patterns of the 1940s to 1960s (the Indian-head test pattern)
Circle CardA big circle over a gray grid, with rows of bars, gratings and gray stepsThe electronic circle cards of European color TV (the PM5544 and the circle cards)
Color BarsSeven bars over a reverse row and a gray rampThe studio color bars standardized in 1978 (what SMPTE color bars mean)

The British picture card, with a child and a clown at its center, has its own history post.

How do I make a please stand by or technical difficulties screen?

Choose the Station Ident's PLEASE STAND BY preset. It puts a round sign across the middle of the card that reads PLEASE STAND BY, with a steady 1 kHz tone. Type your own words in TEXT → PLATE TEXT; each line you type is a line on the sign. For bars with a message instead, the Color Bars' WE’LL BE RIGHT BACK preset lays a plate across the bars.

PLEASE STAND BY

"Stand by" was radio operators' language for wait and be ready, and early stations used it on the air, as Erik Barnouw records in his history of American radio, A Tower in Babel. By the 1950s a "please stand by" slide was standard equipment at a TV station, kept ready for when something broke down. It told viewers the fault was at the station, not in their set, so they would leave the knobs alone and stay tuned.

How do I use a test card as a starting soon screen?

Choose the Station Ident's STARTING SOON preset. The sign reads STARTING SOON and counts down from 5:00, and the color wheel under it turns slowly. Set TEXT → COUNT FROM to the minutes you want, from half a minute to an hour. The countdown starts when the card comes on and holds at 00:00.

For a live stream, render the card as a video and play it in your streaming software, or send the Visualizer itself: the Cast icon in the Visualizer's header opens Output stage, and Send to OBS gives you a page for an OBS Browser source. The Streaming with OBS guide has the steps.

How loud should the test card tone be?

Keep it at −20 dBFS, which is where BeamTracer's TONE LEVEL starts. The tone is a steady 1 kHz sine, the reference tone that ran with bars and test cards; −20 dBFS is the usual reference level in North America and −18 dBFS in Europe (EBU R68). TONE LEVEL goes from −40 to −18 dBFS. The Station Ident, Resolution Chart and Circle Card each have MOTION → TONE, off until you turn it on, except in the PLEASE STAND BY preset. Color Bars has no tone yet.

Early American stations used whatever tone they had. A 1949 article in Radio & Television News describes stations running the pattern for hours with a 400-cycle tone or music, so servicemen could set up and repair sets (Kay, January 1949).

Can I check my TV or projector with a test card?

Yes, for sharpness, black and white levels and overscan. Choose the Resolution Chart's CALIBRATION preset. Its wedges are labeled where their lines are as fine as 720, 1080, 1440 and 2160 TV lines per picture height, with your output's own height ringed; where the lines blur into gray is the most detail your screen, projector or capture keeps. Two strips of near-black and near-white steps show crushed shadows or clipped highlights, and SAFE AREAS draws a line at the frame's very edge, so you can see whether your screen cuts it off.

The chart is for checking by eye and does not measure color accuracy, gamma or brightness the way a colorimeter does, and a card played through a video site is compressed, so download or render it at your screen's exact size first. The Resolution Chart guide explains each strip.

Why did TV have test patterns?

A test card let engineers and viewers adjust cameras, transmitters and sets. Each part checked one thing: circles and grids for a picture that was round and evenly spaced, line wedges for sharpness, gray steps for contrast, and later, color bars for color. Stations broadcast the card whenever the transmitter was on and no program was, usually with a tone.

In the late 1940s American stations broadcast only a few hours of programs, mostly in the evening. Each sent its test pattern before the broadcast so owners could adjust their sets, and many ran nothing but the pattern for hours so TV servicemen could install and repair sets with a real signal, according to Kay's 1949 article. The best-known card, RCA's Indian-head pattern, was not a camera shot at all. It was printed in carbon on an aluminum plate inside a tube called a monoscope, which turned the plate into a video signal, so the picture was always sharp and always framed (Labguy's World). The Indian-head post covers how it was drawn and what each part tested.

In Britain the test card filled the daytime too. When BBC2 began color in July 1967, few people owned a color set, and dealers needed a picture to demonstrate and set them up; Test Card F, with its music, gave them one. The Test Card F post tells how it was made.

Which test cards defined each era?

These five cards come up most when people look up test card history:

  • The Indian-head pattern (United States, 1939). RCA's black and white chart, broadcast before programs into the 1960s. Its history.
  • BBC Test Card F (Britain, 1967). George Hersee's daughter Carole and a clown doll, playing noughts and crosses in the middle of a color card. It is estimated to have aired for about 70,000 hours. Its history.
  • The Philips PM5544 (Europe, late 1960s). Designed by Finn Hendil at Philips in Copenhagen and drawn by electronics, not a camera, it became the circle card of much of Europe. Its history.
  • SMPTE color bars (United States, 1977 to 1978). CBS engineers added the parts that let a technician line up a studio monitor by eye, and SMPTE standardized the pattern in 1978. What each part means.
  • The Video Toaster card (1990s). A test-card-style color graphic from the desktop video era, best known from a T-shirt in Wayne's World 2. What is and isn't known about it.

Why did test cards disappear?

Color, better sets and round-the-clock programming retired them. A monoscope could not make a color picture, so the American monochrome patterns went out as stations converted to color. Sets and cameras improved and stopped needing daily adjustment. Then stations filled the hours the card had held: Britain's BBC1 showed Test Card F overnight until it went 24 hours in November 1997. Digital broadcasting finished the job, since a digital picture doesn't drift the way an analog one did.

Engineers still line up cameras, projectors, LED walls and monitors with test patterns, and streamers and editors use the old cards as stand-by screens, intros and jokes.

Can I use a historic test card in my video?

Use a BeamTracer card instead. The historic cards belong to the companies and broadcasters that made them, and some show real people. Every BeamTracer card is redrawn for BeamTracer, carries no broadcaster's or maker's logo, and takes your own words, picture or widgets where the old card had its marks.

BeamTracer is not affiliated with or endorsed by RCA, the BBC, Philips, CBS, SMPTE or NewTek.

Get BeamTracer updates by email

Email me

At most one email a day and three a week across both. No spam. Unsubscribe anytime.

We email a link to confirm first. Every email has an unsubscribe link. See our Privacy Policy.