Spin Daddy
Spin Daddy is a pixel-grid performance visual in BeamTracer Audio Visualizers, built on WebGPU. Settings, audio modulation, presets, and tips.
Spin Daddy is a pixel-grid performance visual in the Matrix LED category. Open it from the left visualizer list, start an audio source, and use the settings panel to shape its response.
Open Spin Daddy
Launch the visualizer with its matching left-nav entry selected.
Quick start
- Start the demo track, choose a local audio file, or enable a live input.
- Try a preset or style first, then open the section for the part of the image you want to change.
- On a control with Assign modulation, open the source picker, choose a signal, and watch the slider's live fill.
- Use Reset to Defaults whenever you want to return to the original look.
Presets and styles
Hypno · Tie-Dye · Vortex · Disco Daddy
Audio modulation
On a control with Assign modulation, select the activity icon to open Modulate with. Choose a named source, or choose — None to leave the control unmodulated. After you assign one, its name appears below the slider; select that name to edit the route, or use Clear modulation to remove it. The slider track shows the live signal reaching the control.
| Modulated control | Section | What the route changes |
|---|---|---|
| Spin Speed | Swirl | Sets how quickly spin changes or moves. |
| Blur | Swirl | Softens edges and spreads nearby light or color. |
| Hue | Colors | Moves the color around the color spectrum. |
| Hue Cycle Speed | Colors | Sets how quickly hue cycle changes or moves. |
Settings reference
Swirl
| Setting | Available values | What it changes |
|---|---|---|
| Spin Speed | 0–100 | Sets how quickly spin changes or moves. Use Assign modulation to choose a source. |
| Blobs | 1–8 | Controls blobs; higher values increase the effect and lower values reduce it. |
| Loudness Swell | 0x–4x | Controls loudness swell; higher values increase the effect and lower values reduce it. |
| Blur | 0–100 | Softens edges and spreads nearby light or color. Use Assign modulation to choose a source. |
| Trail | 0–100 | Sets how long trail remains visible. |
| Symmetry | POINT, MIRROR, OFF | Chooses the symmetry mode or style. |
| Pulse On Beat | On / Off | Turns pulse on beat on or off. |
Colors
| Setting | Available values | What it changes |
|---|---|---|
| Hue | 0°–360° | Moves the color around the color spectrum. Use Assign modulation to choose a source. |
| Rainbow Blobs | On / Off | Turns rainbow blobs on or off. |
| Auto Hue Cycle | On / Off | Turns auto hue cycle on or off. |
| Hue Cycle Speed | 0.01–1 | Sets how quickly hue cycle changes or moves. Use Assign modulation to choose a source. |
LED Panel
| Setting | Available values | What it changes |
|---|---|---|
| LED Pitch | 6px–40px | Controls LED pitch; higher values increase the effect and lower values reduce it. |
| Dot Gap | 0–0.6 | Sets the spacing between visible elements. |
| Glow | 0–2 | Sets the visible strength of glow. |
| Brightness | 0.2–2 | Sets the visible strength of brightness. |
| LED Profile | RGB PANEL, RED BADGE | Chooses the LED profile mode or style. |
| Unlit LED Color | Color | Sets the unlit LED color. |
Audio
| Setting | Available values | What it changes |
|---|---|---|
| Master Gain | 0x–5x | Sets how strongly the input signal affects master. |
| Smoothing | 0.01–0.8 | Balances immediate audio response against steadier motion. |
Some controls appear only after you enable a related mode or style. The settings panel always reflects the options available for the current selection.
Tips for a better audio visualization
- Use bass for large fills or zoom and highs for small pixel detail; this reads clearly even on a distant screen.
- Try assigning Bass to Spin Speed, then compare Mid, High, and Volume while the demo track plays. The slider's live fill shows the signal reaching that control.