← BACK TO BLOG

What Is the Philips PM5544 Test Pattern? The Circle Explained

The Philips PM5544 is the circle test pattern that broadcasters across Europe and beyond showed from the early 1970s. Danish engineer Finn Hendil designed it at Philips in Copenhagen, starting in 1966, and its generator drew the whole pattern with electronics instead of a camera. Engineers and viewers used it to adjust transmitters and television sets.

BeamTracer's Circle Card is an original test card built on the same plan: a big circle over a gray grid in a black and white border, with rows of color bars, a center line, gratings that get finer, gray steps and two boxes for your channel's name. Each corner holds a focus circle or a live clock or widget, and the card renders as a video with an optional 1 kHz tone.

Who designed the PM5544 test pattern?

Finn Hendil, a Danish engineer at Philips, designed the PM5544 pattern in 1966 at the company's factory on Amager in Copenhagen, and it became one of the most widely used color test pictures in the world (Erling Madsen's history of Danish television). Philips described the PM5544 generator in its own engineering journal in 1970.

Hendil was born in Copenhagen in 1939 and qualified as an engineer in 1962. After military service on radar he joined Philips, where his first task was to find the best red, green and blue for color television and then to design a color test picture (gravsted.dk; digitalt.tv, 2011). According to the building's current owner, the generator was developed in the same factory on Jenagade (Mogens de Linde). Hendil died in January 2011.

How did the PM5544 draw the pattern without a camera?

The PM5544 drew every part of the pattern with electronic circuits. Earlier test cards were artwork or slides shown to a camera or a monoscope tube; Hendil's generator counted lines and timed each one with integrated circuits, then sent the picture out as brightness and color-difference signals for a color encoder (Hendil, Philips Electronic Measuring and Microwave Notes, 1970).

To draw the circle, on each scan line two counters ran down from distances stored in a small memory, marking where the circle's edge crossed that line. The memory held only the top half, and the generator read it in reverse for the bottom half. The circle's diameter is about 83 percent of the picture height, accurate to within 1 percent, and its inside could be swapped for a slide or camera picture at the push of a button. With no international rule for such a pattern, Hendil wrote, his team combined the most useful test signals into "a pleasing and harmonious whole."

The PM5544 pattern on a color set beside an oscilloscope, from Philips' Electronic Measuring and Microwave Notes, 1970. n.v. Philips' Gloeilampenfabrieken, via Wikimedia Commons, reused with attribution.

Why does the Philips pattern have a circle?

The circle shows whether a television set draws its picture in the right shape. Because the generator's circle was so accurate, any egg or flattened shape on screen came from the set itself: a wrong aspect ratio or uneven scanning (J. Overzee, Philips, 1970).

The grid around the circle should form true squares, and its crosshatch is for lining up the three color beams; the lines at the center check that alignment in the middle of the screen. The black and white blocks around the border show whether the picture is cut off at the edges. Because the circle is locked to the grid, and the grid to the scanning itself, the picture holds steady.

The PM5544 pattern, redrawn by ebnz. Wikimedia Commons, CC BY 2.5.

What do the rows inside the PM5544 circle test?

Each row inside the circle tests one part of a color set. Philips' 1970 data sheet and application note describe them, top to bottom (Philips, 1970):

  • Streaking to the right of the black block on white shows poor low-frequency response.
  • The black and white squares show ringing and overshoot at their edges, at the same 75 percent level as the color bars.
  • The color bars run yellow, cyan, green, magenta, red and blue at 100 percent saturation and 75 percent level. With two of the tube's three guns switched off, each bar should match the square above it in brightness.
  • The middle line of the center cross is drawn with the two fields in reverse order, so poor interlacing makes it look different from the grid lines.
  • The gratings, fine stripes from 0.8 to 4.8 MHz, show how sharp the set is. The two finest sit either side of the 4.43 MHz color carrier, so uneven ripple in them points to a lopsided color filter.
  • The gray staircase has six levels in equal steps, for checking that brightness rises evenly.
  • If the color arrives late, the red block on a yellow row smears to one side. Philips chose red on yellow after trying several color pairs.

The striped bars either side of the circle test the PAL decoder: if its delay line or color phase is wrong, they break into colored stripes like a Venetian blind.

The parts of the PM5544 pattern, labeled. By Zacabeb, Wikimedia Commons, CC BY-SA 3.0.

Where was the PM5544 used, and for how long?

The PM5544 spread to most countries with 625-line color television, according to Alan Pemberton's survey of foreign test cards. The BBC showed a modified version from 1971 alongside Test Card F, and the IBA did too at first (Test Card Circle); Wikipedia lists the BBC's version as Test Card G.

According to Wikipedia's history of the pattern, Denmark's DR adopted it with regular color in 1970, replacing Test Card F, and its users ran from Poland and Hungary to Singapore, Hong Kong and Australia's ABC. Philips followed the PM5544 with the PM5534, sold through the 1980s (Matt Millman), and then the PM5644. Wikipedia adds that DK-Technologies, which later took over the generator line in Copenhagen, released the last of them as open source in 2022.

Why did West Germany use the FuBK test card instead?

West German broadcasters chose a circle card of their own, the FuBK test pattern. Its specification was issued in November 1973 by the Institut für Rundfunktechnik, the public broadcasters' research institute (IRT Technische Richtlinie 8/13.1), and according to German Wikipedia, Germany settled on it that year instead of the PM5544.

FuBK stands for Funkbetriebskommission, German for broadcast operations commission. The IRT document describes a universal test card for black-and-white and color broadcasts: a cross formed by the grid lines at the center, color bars from white to black, a five-step gray scale, fine gratings at 1, 2, 3 and 4.43 MHz, a circle, and a black bar for the station's name. Telefunken and Fernseh built generators for it, and it is often called the Telefunken FuBK. It also ran in Switzerland, Finland, Norway, Luxembourg and Yugoslavia (Alan Pemberton).

A recreation of the FuBK test pattern by 4throck, Wikimedia Commons, CC0.

What were the East German and Soviet circle test cards?

East Germany and the Soviet Union had electronic test cards of their own. East German television began color in 1969 on its second channel, using the French SECAM system (MDR), and the Soviet UEIT chart, a circle over a grid, went on air in 1970, according to Wikipedia.

In 1966 the East German broadcaster DFF still used a black-and-white grid card with a ten-step gray wedge in the middle. In the same trade-magazine article, the Deutsche Post's broadcast engineering office in Berlin-Adlershof said it was developing an electronic test card that would be easy for servicemen to use (radio und fernsehen, 1966). No published source we found names the designer of the DFF's later color card or the date it first aired.

According to Wikipedia's article on the chart, the UEIT (Universal Electronic Test Chart) was developed by N. G. Deryugin and V. A. Minaev at the NIIR radio research institute, first broadcast from Ostankino in 1970, and used in Russia until 2019.

Where do you still see the PM5544?

Today the PM5544 turns up mostly as a design. Danish sources note it has been printed on pillows, T-shirts and bicycle helmets, and it appeared in Finn Hendil's death notice in 2011 (Erling Madsen; gravsted.dk).

How do I make a circle test card with my own channel name?

Open the Circle Card in BeamTracer Title Cards, type your channel's name into its two name boxes, choose whether the rows sit inside the circle or across the grid, and render the card as a video. It borrows the circle-over-grid plan without copying anyone's card or logo.

  1. Open Title Cards, choose MODULE → CIRCLE CARD and pick the CIRCLE BARS preset.
  2. Under TEXT, type your channel's name in TOP NAME and a place or a time in BOTTOM NAME (guide).
  3. Under STYLE, set ROWS to IN CIRCLE for rows in a white disk, or ACROSS to lay them over the grid with the circle drawn as a line (guide).
  4. Pick a ROW ORDER, BARS AND BURST or FULL CARD, and set BAR LEVEL to 75%.
  5. To put a live clock in a corner, choose CLOCK BRAUN in TOP LEFT CIRCLE (guide).
  6. Under MOTION, turn on TONE for a steady 1 kHz tone (guide).
  7. Choose RENDER, then RENDER VIDEO, and SAVE VIDEO when it reads VIDEO READY.

Above, BeamTracer's own card from the CIRCLE GRID preset, rows ACROSS. Below, the CIRCLE BARS card with live widgets in its corners.

The retro TV test card guide covers all of BeamTracer's test cards, and BBC Test Card F tells the story of the card the PM5544 replaced in Denmark. For the American patterns, read about the RCA Indian-head test pattern and what SMPTE color bars mean.

BeamTracer is not affiliated with or endorsed by Philips, Telefunken or any broadcaster named here.

Get BeamTracer updates by email

Email me

At most one email a day and three a week across both. No spam. Unsubscribe anytime.

We email a link to confirm first. Every email has an unsubscribe link. See our Privacy Policy.