← BACK TO BLOG

How Do I Make an Infinite Zoom With the Droste Effect?

Open DROSTE in BeamTracer Performer and choose VAN GOGH under FX RACK → SOURCE. The portrait repeats inside itself. Set AMOUNT to 1.00 for a full tunnel, then set SPEED to 0.32 copies/s and SPIRAL to 0.52 to make the copies travel and turn.

Vincent van Gogh’s 1889 self-portrait appears at several scales. Watch an eye or the edge of the jacket to see how each smaller copy leads into the next.

What is the Droste effect?

The Droste effect is what you see when a picture contains a smaller copy of itself, and that copy contains another. The name comes from Dutch Droste cocoa packaging. The label shows a nurse carrying a tray with a cocoa tin, and the tin on the tray has the same picture on it. Each copy gets smaller until it is too small to see. See the Droste tin in the Bright Museum collection.

Performer builds the nested copies from one still image. Give SPEED a value to move through them, then raise SPIRAL to turn each layer. You can build a moving tunnel from a photo you already have.

Which settings make the zoom readable?

Start with the built-in VAN GOGH portrait. The lines around the face and jacket stay recognizable as the tunnel gets smaller, which makes it easy to see the effect of each control.

  1. Open Droste in Performer.
  2. Under FX RACK → SOURCE, choose VAN GOGH.
  3. Open FX RACK and expand DROSTE.
  4. Match the settings below and leave the two center controls at 0.50.
  5. Temporarily set SPIRAL to 0.00, then bring it back up to 0.52. Watch the edge of the jacket through the change.
  6. Use RECORD to save the live zoom as a video.
ControlStarting valueWhat to watch
AMOUNT1.00The full treatment. Lower the amount when you want more of the source portrait to show through.
RATIO2.62A higher value puts more space between successive copies.
SPIRAL0.52The angle changes as the image recedes. Zero gives a straight tunnel.
SPEED0.32 copies/sSets the zoom travel. Try zero on a still to inspect the layers, or use a negative value to reverse the travel.
CENTER X / CENTER Y0.50 / 0.50Keeps the center of the tunnel in the middle of the picture.

How do I use my own photo?

In Performer, open FX RACK → SOURCE → VIDEO · IMAGE and load a still. Keep DROSTE enabled. Pick a photo with a strong frame within the frame, like a doorway, an arch, or a bright sign with dark space around it. Stop the zoom with SPEED 0.00 while you find the subject with CENTER X and CENTER Y. Restore the speed once the smaller copies sit where you want them. Change one axis at a time. Try CENTER X 0.65 with CENTER Y 0.50 if the part of the picture you want to follow is right of center, then compare with both set to 0.50. If the repeated subject looks too far apart, lower RATIO a little and inspect the same edge again.

Simon Alexander-Adams' TouchDesigner walkthrough builds a related infinite zoom with looping noise, instanced geometry, and a camera path. Performer repeats the existing picture directly, which also gives you a way to animate a still with the same controls. Looping Noise Part 2: Infinite Tunnel Zoom

How do I know when the tunnel is ready to record?

Follow a bright edge toward the center for several seconds. You should be able to find it again in at least two smaller copies. Look at the result at phone size. If the copies read as a bright blur, lower SPEED before changing the colors. When the center looks tangled, try SPIRAL 0.00 and add back a small amount once the zoom reads clearly. A tunnel with a still center may simply be at SPEED 0.00. Try 0.20 and check whether a nested edge moves.

Check the end of your recording against the opening if you plan to play it as a loop. With a still photo, look for the same scale and orientation at both ends. When you use video as the source, the pose also needs to line up.

See the image effects guide for the FX Rack controls and the video trails tutorial for a different use of repeated images.

Get BeamTracer updates by email

Email me

At most one email a day and three a week across both. No spam. Unsubscribe anytime.

We email a link to confirm first. Every email has an unsubscribe link. See our Privacy Policy.