How to Make Visuals Change at Each Section of a Song
To make visuals change at each section of a song in BeamTracer Audio Visualizers, load the song, click Assign modulation next to a slider such as HUE and choose Section change under SONG STRUCTURE. Set the route's Algorithm to Count and Threshold to 0.50. The slider then steps once at every new section, live and in RENDER VIDEO.
Radial Machines with HUE on Section change, saved with RENDER VIDEO over the included Orbital Perlin Blob track. At 0:20 the verse comes in: the machine turns from gold to teal, and BAR CLOCK at the top left changes from INTRO · 1 OF 7 to VERSE · 2 OF 7. Press Play for sound.
BeamTracer finds the sections in the music itself, so you place no markers by hand, and each verse, build or drop gets its change even in a song whose volume barely moves. BAR CLOCK and the other score widgets show the same sections on screen, which tells you where each change will land before you render.
How do I change the look at each new section of a song?
Route the slider to Section change, then set the route's Algorithm to Count. Section change jumps to 1 where a section starts and falls back to 0 over one beat; Count moves the slider one step each time it jumps. The Audio Modulation guide explains every route setting.
- Open Radial Machines in Audio Visualizers and drag your song onto the visualizer. A music file up to 10 minutes long works.
- In the settings panel, open COLOR and click the activity button next to HUE (Assign modulation).
- In MODULATE WITH, scroll to SONG STRUCTURE and choose Section change.
- In the route options under the green Section change pill, set Algorithm to Count, Threshold to 0.50 and Steps to 3.
- Set Anchor to From range min/max and Amount to 0.67.
- Play the song. The color changes as each new section starts.
- To keep it, click RENDER, choose MP4 · H.264 or WEBM · VP9, then click RENDER VIDEO and SAVE VIDEO.
The first time a slider uses Section change, BeamTracer reads the song to find its sections, which takes a few seconds. Until then the source shows as unavailable and the slider holds still. Live input from a microphone or a browser tab has no sections, so this needs a music file.
Count takes one step each time Section change rises past Threshold, and starts over after Steps steps. With three steps and Anchor on From range min/max, HUE moves a third of the way around the color wheel at each new section: gold, then teal, then violet, then gold again. Amount at 0.67 keeps the third color from landing back on the first. A new route starts with Threshold at 0, and there Count steps once and then stays, so raise it first.
The example song has seven sections, so the seventh, the drop, comes back around to gold:
The drop at 2:14 in the same render: VERSE · 6 OF 7 becomes DROP · 7 OF 7, and the machine turns from violet back to gold. This clip is silent.
Sweep or cut
A new route starts with Smooth at 0.20, so each change sweeps through the colors in between for about half a second, as in these clips. Set Smooth to 0 for a hard cut on the first frame of the new section.
How does BeamTracer find where each section starts?
BeamTracer reads the whole track once and starts a new section where the harmony or the instruments change, not only where the song gets louder or quieter. That is how it finds verses, choruses and breaks in a song that stays at one level. Each section gets a label from how it sounds: INTRO, VERSE, BUILD, DROP, BREAK or OUTRO.
Several sections in a row can share a label. The example track has seven: an INTRO, five VERSE sections and a DROP. Section change jumps at the start of every one of them, whatever its label. With the song's MIDI file loaded through LOAD MIDI, the sections follow the file's tempo and bar lines instead.
How do I see which section is playing?
Add BAR CLOCK, NOTE HIGHWAY or STEP RING to the HUD effect. Each one names the section playing and its place in the song, such as VERSE · 3 OF 7, so you can tell one verse from the next even though the label stays the same. The HUD plates guide describes all eight score widgets.
A close-up of BAR CLOCK from a 4K render of the same song, at about one minute in. The label stays VERSE, but the count moves from 2 OF 7 to 3 OF 7 and the machine turns from teal to violet. This clip is silent.
- In Audio Visualizers, open EFFECTS at the bottom of the settings panel and add HUD from ADD AN EFFECT. In Performer, the same effect is in the FX Rack.
- Open HUD and set it to ON.
- Under WIDGETS, press + on BAR CLOCK, NOTE HIGHWAY and STEP RING.
- Set SWAP SETS to OFF so the same three widgets stay on screen.
The example also sets FRAME to WIDGETS ONLY, UI PLACEMENT to LEFT COLUMN and UI SCALE to 1.6, with BOXES + LABELS off, so only the widgets sit beside the picture. For the note widgets with a MIDI file, see how to add a piano roll and note highway.
How do I build up to each change with Section progress?
Choose Section progress instead of Section change. It rises from 0 where a section starts to 1 where the next one begins, so a slider routed to it climbs through each section and drops back at the change. Leave Algorithm on Linear and use Amount to set how far it climbs. It suits a slider that should build up and peak just before the next section.
Radial Machines with TOOTH DEPTH on Section progress, Algorithm on Linear and Anchor on From range min/max, saved with RENDER VIDEO over the same song. The third section starts at 1:01 with the rings almost smooth, and their teeth grow deeper for the next ten seconds. At 1:11 BAR CLOCK changes from VERSE · 3 OF 7 to VERSE · 4 OF 7 and the rings flatten again. This clip is silent.
Does it work on long songs and DJ mixes?
Yes, for tracks up to 10 minutes long. Tempo, the score widgets and song sections cover the whole track, so an extended mix or a short DJ set gets its beat grid and sections too.
A 7:12 file made of the included Orbital Perlin Blob track three times in a row. At 6:42, STEP RING is on bar 160, VERSE · 22 OF 24.
A file longer than 10 minutes still plays and the visuals still react to it, but it gets no song sections. BAR CLOCK and STEP RING follow the live beat instead, a slider routed to Section change holds still, and RENDER VIDEO stops with a message that the track has no song sections. Split a longer set into parts of 10 minutes or less.
How do I render the section changes into a video?
Click RENDER, pick MP4 · H.264 or WEBM · VP9 and a frame rate, leave INCLUDE AUDIO on to keep the song, then click RENDER VIDEO and SAVE VIDEO. Every frame reads the section at its own moment in the song, so the changes land where they do in playback.
To render only part of a song, open RENDER RANGE. The count still includes every section before the range, so the colors match a render of the whole song: a range that starts at 2:09 shows the same violet verse and gold drop as the clip above.
Is it free?
Yes. Song sections, Section change, Section progress and the score widgets work on the free plan. RENDER VIDEO works too, with a small watermark, and each video counts toward the free plan's monthly exports. After your one free full-length export, free renders with sound are up to 5 minutes long. See pricing for the plans without a watermark.