← BACK TO BLOG

How Do I Make Video Movement Push Particles in My Browser?

To make movement in a video push particles, open BeamTracer Performer, load a moving clip, and add PARTICLES. Choose CLOUD and SOURCE → PICTURE, then raise FLOW in the MOTION section. A wave of the hand disturbs nearby points while the portrait remains visible.

BeamTracer puts the moving source, person mask and particle controls in the same FX Rack. You can compare a cloud that settles back into the picture with particles that stream onward, using the same clip. You do not need a separate hand-tracking setup for this motion input.

TRINA · HANDS, CLOUD, PERSON emission and FLOW 2.20. HAND STIR and TURBULENCE are both 0. The source keeps playing; the demonstration is silent.

How do I make a motion-driven particle portrait?

Use a steady shot with a visible face and deliberate movement. The built-in TRINA · HANDS clip works well because you can follow the fingers as they cross the picture.

  1. Open Performer with PARTICLES.
  2. In SOURCE, choose TRINA · HANDS, or load a moving clip with VIDEO · IMAGE.
  3. In PARTICLES, choose MODE → CLOUD and SOURCE → PICTURE.
  4. Under EMISSION, choose EMIT FROM → PERSON. Wait for the mask before judging hair and fingertips.
  5. Set GRID → 200, LAYERS → 2, POINT SIZE → 0.60, SHAPE → DISC, and GLOW → 0.22.
  6. Open MOTION. Set SWING, FAN, TURBULENCE and HAND STIR to 0, then set FLOW → 2.20.
  7. Under COMPOSITE, set TRAILS → 0.52 and leave PICTURE → 0.

The face should still read as a face. During a gesture, watch the points around the moving arm; then watch what happens when the arm slows. In CLOUD, the displaced points return toward their picture positions.

PERSON removes the room from the particle picture. Choose ALL if you want the background included. A moving camera can then disturb points across the whole frame, so start with a stationary camera.

What does FLOW change?

FLOW uses estimated movement between picture frames. At 0, this contribution is off; at higher values, that movement pushes the particles more strongly. Its range is 0–3. Keep the other motion controls low while comparing it.

One continuous source playback: FLOW changes from 0 to 3. Compare movement around the hands over several gestures; the two settings show different moments in the clip.

FLOW and HAND STIR have different inputs. FLOW responds to picture movement, including sleeves or an object passing through the shot. HAND STIR uses tracked hands to disturb nearby particles. Turn HAND STIR back up when you want that additional interaction; the particle portrait tutorial gives a hand-stirring recipe.

A still image supplies no changing picture motion. A paused video also makes a poor test. Check the source itself is advancing before increasing FLOW.

How do I carry the particles away from the picture?

Choose MODE → STREAM and STREAM FROM → PICTURE. Keep FLOW → 2.20, then use this starting point:

ControlValueWhat to look for
DENSITY0.55Enough new points to describe the moving subject
LIFE1.80 secondsA short history of the gesture
SIZE2.20Points large enough to read at article size
DRIFT SPEED0.08Gentle travel alongside the motion input
TURBULENCE0.10A little irregularity without losing the gesture

STREAM from PICTURE, with PERSON emission retained. LIFE controls the particles' lifetime; TRAILS controls the retained screen image.

Long life and strong trails can hide the current pose beneath older movement. Shorten LIFE first, then lower TRAILS if the image remains crowded.

Why does the result look noisy or barely move?

The whole picture surges. Try a locked camera and steady lighting. Cuts, camera movement and exposure changes affect the estimated motion. Use a slower gesture to judge direction before adding a fast dance clip.

The portrait disappears. Lower FLOW, reduce TRAILS, and check PERSON emission on a well-lit frame. Hair and blurred fingertips can break up in the mask. ALL emission helps distinguish a masking problem from a particle-motion problem.

The cloud looks static. Confirm the video is playing and the mode is CLOUD with PICTURE selected. This recipe does not apply to MODEL, SNAP or TIGHT CONTOURS. A face staying still can coexist with movement around a waving hand.

Playback struggles. Reduce GRID or LAYERS and inspect the result again. More sampled points increase GPU work; a readable silhouette matters more than maximum density.

How do I save and judge the result?

Use RECORD for a live camera or screen performance. For an uploaded video, the Render Video workflow also uses its moving frames. Replay the saved file and check that the source advances, the face remains recognizable, and gestures leave a trace without filling the background.

The image-effects guide also covers motion flow in FEEDBACK if you want the retained picture to stretch with movement.

Get BeamTracer updates by email

Email me

At most one email a day and three a week across both. No spam. Unsubscribe anytime.

We email a link to confirm first. Every email has an unsubscribe link. See our Privacy Policy.