← BACK TO BLOG

How Do I Make a Video Feedback Effect in My Browser?

To make a video feedback effect, open BeamTracer Performer, load a clip, and add FEEDBACK → TRAILS. Raise PERSISTENCE, then adjust ZOOM and SPIN so older poses change size and turn behind the current picture. Add EDGES → NEON before FEEDBACK for the colored contour trails shown here.

BeamTracer keeps the source, outline treatment and feedback in one FX Rack. You can change the trail while the video plays and render the same stack to MP4 or WebM. You do not have to film a monitor showing its own camera feed or assemble a separate feedback-processing loop.

EDGES feeds FEEDBACK. PERSISTENCE 0.965, ZOOM 0.015, SPIN 0.04 and HUE SHIFT 0.04 retain and recolor the moving contours. The examples are silent.

How do I make a neon portrait with feedback trails?

Put EDGES above FEEDBACK so the outlines enter the feedback history. This gives gestures room to leave visible trails on black; an untreated room background can hide much of that separation.

  1. Open Performer with FEEDBACK.
  2. In SOURCE, choose TRINA · HANDS or load a moving clip with VIDEO · IMAGE.
  3. Add EDGES under ADD AN EFFECT, then choose STYLE → NEON and match the line settings below.
  4. Move EDGES above FEEDBACK in the rack's order by dragging its grip, or focus the grip and press the up arrow.
  5. In FEEDBACK, choose MODE → TRAILS and enter the feedback settings below.
  6. Play the clip and watch a hand open, move and close before adjusting the trail.
  7. Click RENDER, choose MP4 · H.264 or WEBM · VP9, set size and frame rate, then click RENDER VIDEO and SAVE VIDEO.
EDGES controlValueWhy use it
STYLENEONTurns the incoming picture's boundaries into glowing lines
LINE COLORDIRECTIONGives differently oriented edges different colors
BLENDLINES ONLYLeaves black between the outlines
INTENSITY2.00Keeps the moving subject visible without making every line heavy
THICKNESS1.30Retains facial detail at the demonstrated output size
THRESHOLD0.08Removes some weak edges before the trail repeats them
MIX1.00Sends the complete line treatment into FEEDBACK
FEEDBACK controlValue
MODETRAILS
PERSISTENCE0.965
ZOOM0.015
SPIN0.04
HUE SHIFT0.04
DRIFT X / DRIFT Y0 / 0
BLUR0 px
DISPLACE0
MOTION FLOW0
RESETOFF

Use a medium shot with deliberate movement. A hand crossing a dark area makes the history easier to read than a nearly stationary face. Keep other effects off while matching the recipe; an effect before FEEDBACK changes the material entering the history, while one after it treats the combined picture and trails.

The image-effects guide connects this recipe with the complete source controls.

What is video feedback, and why does it make these shapes?

Video feedback combines the current picture with a transformed version of previous output. The previous output already contains older pictures, so repeated zooming and turning build layered shapes over time. A new hand pose sits among traces of earlier poses instead of replacing them immediately.

Video artists also make feedback by pointing a camera at its own monitor. LZX's feedback guide explains that camera-and-monitor technique and how zoom and retention shape the result. Its hardware controls differ from BeamTracer's; use the recipe on this page for the browser effect.

The apparent depth comes from overlapping, transformed pictures. This recipe does not reconstruct a 3D person. For a view you can orbit around retained video frames, use the separate Time Cube tutorial.

Move slowly enough to recognize both the current pose and its history. If every gesture becomes a dense knot, shorten the trail before adding blur or more color.

How do I make the feedback shorter or straighter?

Lower PERSISTENCE to remove old poses sooner. Keep the other controls unchanged for the first comparison, then set ZOOM, SPIN and HUE SHIFT to zero to compare plain motion trails with the transformed history.

PERSISTENCE 0.600. The remaining line and feedback settings match the opening recipe.

PERSISTENCE returns to 0.965; ZOOM, SPIN and HUE SHIFT are all 0. The gesture supplies the movement.

ZOOM changes the scale of retained pictures; SPIN turns them. Start with one of these at zero when you want to understand the other. DRIFT X and DRIFT Y shift the history sideways or vertically. HUE SHIFT changes the color as the picture passes through the feedback, so it can make successive layers easier to distinguish.

BLUR softens the retained image. DISPLACE deforms the trail, and MOTION FLOW lets movement in the source push it. Keep those at zero for a clean comparison. The picture-motion tutorial covers motion-driven particles; they are a different result from retaining whole picture pixels.

How do I clear the feedback on a musical hit?

Choose RESET → ON HIT, then use FEEDBACK's HIT control to clear the retained picture. ON BEAT clears it on accepted beat events. Leave RESET OFF when you want uninterrupted history.

Clearing the history lets the next gesture begin with less visual clutter. It also changes the composition abruptly, so reserve it for a cue where that cut helps the music. RESET does not trim or restart your source video. Repeated resets can make a high-persistence trail seem unexpectedly short.

For the complete effect reference, see FEEDBACK in the FX Rack guide.

How do I tell whether the feedback looks good?

Watch one complete gesture at the intended playback size. The current face or hands should remain identifiable, while older contours add a readable direction of travel. Pause the output to check that fine lines have not merged into a bright block, then play it again to judge the movement.

ProblemWhat to check
The room overwhelms the trailsPut EDGES before FEEDBACK and use LINES ONLY
The face disappears into old outlinesLower PERSISTENCE or clear the history between phrases
The outline is too busyRaise EDGES THRESHOLD slightly before making the trail stronger
The picture feels softReturn BLUR to 0 and compare the exported frame at its actual size
The trail keeps vanishingCheck RESET; ON BEAT may clear it more often than intended
Old poses do not turnRaise SPIN from 0 while leaving ZOOM unchanged
You want broken video blocksUse MOSH; this TRAILS recipe is a different mode

Inspect the downloaded file as well as the preview. A smaller delivery size can merge nearby lines, and a short source clip can restart before the feedback finishes fading. Choose footage long enough for the passage you plan to use.

Get BeamTracer updates by email

Email me

At most one email a day and three a week across both. No spam. Unsubscribe anytime.

We email a link to confirm first. Every email has an unsubscribe link. See our Privacy Policy.