How Do I Make a Kinetic Video Collage in My Browser?
To make a kinetic video collage, open BeamTracer Performer, load a clip in SOURCE, and add CLONE. Choose TILED, set COPIES, then open KINETIC MOTION and select ROWS, COLUMNS or CASCADE. Each complete picture keeps playing while the arrangement moves through a staggered cycle.
BeamTracer repeats one playing source, so you can change the collage's timing without building a separate timeline for every tile. The copies preserve the picture's proportions. Use the same controls for a webcam, an uploaded clip or the built-in TRINA · HANDS example, then render an uploaded-video composition from the browser.
CASCADE, nine copies, a four-second cycle and PHASE STAGGER 0.18. All tiles show the same playing source. These examples are silent.
How do I make staggered video tiles?
Start with nine copies in a tiled layout, then add motion. Choose footage with one readable subject: if a face is already small in the source, repeating it makes the expression harder to read.
- Open Performer with CLONE.
- In SOURCE, choose TRINA · HANDS or use VIDEO · IMAGE to load your clip.
- In CLONE, choose LAYOUT → TILED and CURRENT PICTURE.
- Set COPIES → 9, COPY SIZE → 1.00, COPY GAP → 0.10, ROTATION → 0° and MIX → 1.00.
- Open KINETIC MOTION and choose KINETIC → CASCADE.
- Set MOTION AMOUNT → 0.65, CYCLE → 4 s, PHASE STAGGER → 0.18 turns, MOTION DIRECTION → 0° and PHASE OFFSET → 0 turns.
- Play the source through a complete cycle before adjusting the spacing.
- Click RENDER, choose MP4 · H.264 or WEBM · VP9, set the output size and frame rate, then click RENDER VIDEO and SAVE VIDEO.
The source animation and tile motion do different jobs. Trina's hands move inside every picture because the video plays; KINETIC changes where those complete pictures sit. PHASE STAGGER delays their movement within the cycle. It does not create a different video time for each tile.
Judge the face at the size people will watch. Reduce COPIES before enlarging a tiny source face; a busy collage of unreadable portraits usually needs fewer pictures.
Should I choose Rows, Columns or Cascade?
Choose ROWS for bands of pictures that move together, COLUMNS for vertical groups, or CASCADE to offset successive copies. Keep the other values fixed when comparing them so you can see how the grouping changes the rhythm.
ROWS with the same nine-copy recipe. Read the movement across each band before watching the hand gestures inside it.
COLUMNS. Only KINETIC changes between these two examples; the movement settings remain the same.
| Control | What to watch | A useful adjustment |
|---|---|---|
| MOTION AMOUNT | How far the copies travel | Lower it when motion distracts from the subject |
| CYCLE | Time for one movement cycle | Increase it for a slower collage |
| PHASE STAGGER | Separation between neighboring groups | Try 0.25 turns for a quarter-cycle offset |
| MOTION DIRECTION | The direction of travel | Try 90° when you want the movement to cross the other axis |
| PHASE OFFSET | Where the cycle begins | Shift it when the opening pose feels crowded |
| COPY GAP | Space between complete pictures | Increase it when neighboring pictures become hard to separate |
PHASE STAGGER uses turns. With a four-second CYCLE, 0.25 turns separates adjacent groups by one second. A value of 0 aligns them; a whole turn returns to the same phase, so 1 also aligns neighboring groups. Increasing the number does not always create a larger visible delay.
How do I fit the movement to music?
Choose a cycle length that spans a whole number of beats, then check it against your track. At 120 BPM, a beat lasts half a second, so the four-second recipe spans eight beats. At 100 BPM, eight beats take 4.8 seconds. Enter CYCLE → 4.80 s for that starting point.
This is a duration setting, not automatic tempo detection or a guarantee that the cycle starts on the downbeat. PHASE OFFSET changes the starting pose; the normal modulation controls can also drive numeric CLONE settings. Establish a readable arrangement before adding another changing value. Modulating the copy count and movement at once makes it harder to see which change caused a crowded frame.
For complete collection controls, see CLONE in the image-effects guide. The KINETIC MOTION reference also covers music and hand assignments. Collections use still images; an animated upload inside a collection does not play as an independent movie. Use CURRENT PICTURE for the playing-video method shown here.
Why does my collage look static or crowded?
Check KINETIC and MOTION AMOUNT first. OFF or MOTION AMOUNT 0 leaves the arrangement still even while the source plays. A very slow CYCLE can also make a short preview look motionless.
| Symptom | What to change |
|---|---|
| Every row moves together | Move PHASE STAGGER away from 0 or 1 |
| The collage hides the expression | Reduce COPIES and review at phone size |
| The source looks stretched | Use CLONE for complete proportional pictures; check whether another effect already distorts the incoming source |
| The frame feels too busy | Lower MOTION AMOUNT before adding more effects |
| A source clip plays but tiles stay fixed | Choose ROWS, COLUMNS or CASCADE and raise MOTION AMOUNT |
| The motion seems unrelated to the song | Calculate a whole-beat CYCLE, then check the starting phase against the track |
Watch the exported file through a complete movement cycle. Look for clear separation, a recognizable subject and enough quiet space for titles. If your source loops, its restart appears inside every copy. Choose a longer source interval when you need continuous movement through the whole export.
For irregular sections that resize around a head, use the separate animated video grid tutorial. CLONE repeats whole pictures while their arrangement moves.